Abstract:The synthesis of ammonia using non-thermal plasma can present distinct advantages for distributed stand-alone operations powered by electricity from renewable energy sources. We present the synthesis of ammonia from nitrogen and hydrogen using a membrane Dielectric-Barrier Discharge (mDBD) reactor integrated with metal catalyst. The reactor used a porous alumina membrane as a dielectric-barrier and as a distributor of H 2 , a configuration that leads to greater NH 3 production than using pre-mixed N 2 and H 2 . The membrane is surrounded by catalyst powder held by glass wool as porous dielectric support filling the plasma region. We evaluated nickel, cobalt, and bimetallic nickel-cobalt as catalysts due to their predicted lower activation energy under non-thermal plasma conditions as determined through Density Functional Theory (DFT) calculations. The catalysts were loaded at 5% by weight on alumina powder. The performance of the catalytic mDBD reactor was assessed using electrical, optical, and spectroscopic diagnostics, as well as Fourier-Transform Infrared spectroscopy. Experimental results showed that the glass wool support suppresses microdischarges, generally leading to greater ammonia production. The Ni-Co/Al 2 O 3 catalyst produced the greatest energy yield of 0.87 g-NH 3 /kWh, compared to a maximum of 0.82 and 0.78 g-NH 3 /kWh for the Co/Al 2 O 3 and Ni/Al 2 O 3 catalysts, respectively. Although the differences in performance among the three metal catalysts are small, they corroborate the predictions by DFT. Moreover, the maximum energy yield for bare Al 2 O 3 (no metal catalyst) with dielectric support was 0.38 g-NH 3 /kWh, for mDBD operation with no metal catalyst or dielectric support was 0.28 g-NH 3 /kWh, and for standard DBD operation (no membrane, dielectric support, or catalyst) was 0.08 g-NH 3 /kWh, i.e., 2.1, 3.1, and 11 times lower, respectively, than the maximum energy yield for the Ni-Co/Al 2 O 3 catalyst with dielectric support. The study shows that the integration of dielectric membrane and metal catalyst is an effective approach at enhancing ammonia production in a DBD reactor.

Plasma-assisted ammonia synthesis in a packed-bed dielectric barrier discharge reactor: roles of dielectric constant and thermal conductivity of packing materials

Ammonia Synthesis Via Nitrogen-Coupled Methane Conversion at Ambient Temperature and Plasma Conditions

Non-thermal Atmospheric Plasma Synthesis of Ammonia in a DBD Reactor Packed with Various Catalysts

Hydrogenation of Plasma-Excited Nitrogen over an Alumina Catalyst for Ammonia Synthesis

Dielectric barrier discharge plasma-assisted catalytic ammonia synthesis: synergistic effect of Ni-MOF-74 catalyst and nanosecond pulsed plasma

Co‐Ni/MOF‐74 catalyst packed‐bed DBD plasma for ammonia synthesis

Tailoring the surface acidity of catalyst to enhance nonthermal plasma-assisted ammonia synthesis rates

Plasma-enabled sustainable ammonia synthesis at atmospheric pressure: the role of catalysts on synergistic effect

Ammonia Synthesis via Membrane Dielectric-Barrier Discharge Reactor Integrated with Metal Catalyst

A Comparative Study of In- and Post-Plasma Catalysis Configurations for Ammonia Synthesis: Effect of Temperature

Plasma ammonia synthesis over mesoporous silica SBA-15

Effect of surface porosity of catalytic supports on plasma-assisted catalysis for ammonia synthesis

Optimization for Plasma-facilitated Catalytic Reduction of NO_x

Non‐Oxidative Coupling of Methane Driven by Non‐Thermal Plasma: Effect of Packing Materials on Micro‐Electric Field

High efficiency NO x synthesis and regulation using dielectric barrier discharge in the needle array packed bed reactor

Effect of packed quartz pellets on DBD plasma treating with NO

Identifying Regimes During Plasma Catalytic Ammonia Synthesis

Kinetic Modeling Analysis of Ar Addition to Atmospheric Pressure N2-H2 Plasma for Plasma-Assisted Catalytic Synthesis of NH3

Research Review of Non-equilibrium Plasma Technology for Ammonia Synthesis

Ni‐MOF‐74 Derived Carbon‐Based Ni Catalysts for Efficient Catalytic Ammonia Synthesis via Pulsed DBD Plasma

Importance of plasma discharge characteristics in plasma catalysis: Dry reforming of methane vs. ammonia synthesis