Abstract:As electronics become lighter, shorter and more complex, the potential damage to integrated circuits (ICs) from electrostatic discharge (ESD) becomes more severe. In many applications, high voltages will result in high electric fields and high current densities in miniaturized components, which can lead to gate oxide breakdown of circuit components and thermal damage in ICs. Therefore, ESD protection circuits are added inside the electronic product in order to prevent the above damage, but the area of the protection cell should not be too large, otherwise a large proportion of the IC manufacturing cost is spent on the protection circuit. In this paper, we investigate how to improve the ESD protection of the designed high-voltage components through TSMC’s 0. 1S-micron BCD HV process. The sample structures of this work all use high-voltage N-channel laterally diffused MOSFETs (LDMOS), and the I/O protection components can be improved by this protection architecture. First, the ESD robustness of the device is enhanced by embedding a Schottky diode in the bulk end of the nLDMOS. The Schottky diode is parasitized horizontally at the body terminal. Since the parasitic Schottky diode is at the body electrode of the device, the parasitic BJT capability is enhanced, making it easier to trigger the conductivity of the device. Therefore, the new components $\mathrm{V}_{\mathrm{t}i}$ and $\mathrm{V}_{\mathrm{h}}$ values decrease (because the horizontal parasitic Schottky is reversed so the decreasing is obvious), so that the high-voltage ESD protection components have a better performance under ESD events, this design also makes the anti-ESD capacity $\mathrm{I}_{\mathrm{t}2}$ significantly increased. In the case of the body-end horizontal (reversed) embedded Schottky element, the largest $\mathrm{I}_{\mathrm{t}2}$ is found on the $\mathrm{R}\mathrm{e}\mathrm{f}_{-}8\mathrm{S}_{-}\mathrm{B}_{-}8$ device, whose $\mathrm{I}_{\mathrm{t}2}$ improvement rises up to 4. 529A, an significant increase of 244.41% was achieved as compared with the reference sample.

Cost-Efficient Solution to Overcome Latch-Up Path in 5 V-Tolerant I/O With Low-Voltage Biased NBL Isolation Ring in a 0.18-μm BCD Technology

A Capacitively Coupled Digital Isolator with CMTI of 162 kV/μs and Data Rate of 230 Mbps

A Capacitively Coupled Digital Isolator Using Multiple-pulse-coding Architecture with CMTI of 200 Kv/μs and Static Current of 60 Μa

A Novel Dual-Channel Soi Ligbt with Improved Reliability

Novel ESD Protection Design Methodology and Latchup Prevention for a 0.5-&Amp;#956;m CMOS ASIC Library

Static CMOS Latch-Up Considerations in HVIC Design

Investigation of Esd Protection Strategy in High Voltage Bipolar-Cmos-Dmos Process

A Low Loss Soi Lateral Trench Igbt and Superjunction Device with Insulated Trench Barrier

Improved LDMOS for ESD Protection of High Voltage BCD Process

The Influence of an LIGBT on CMOS Latch Up in Power Integrated Circuit

A Non-Redundant Latch with Key-Node-Upset Obstacle of Beneficial Efficiency for Harsh Environments Applications

High Frequency 700v Powerbrane Ligbts In 0.35 Mu M Bulk Cmos Technology

Enhanced ESD-Capability of High-Voltage 32 V N-Channel LDMOSs with the Body-Side Hetero-Junction Structure

ESD-Performance Enhancement of Circular Ultra-High-Voltage 300-V N-Channel Lateral-Diffused MOSFETs by Source/Drain Embedded Schottky Diodes

Performance of 200 V Cmos Compatible Auxiliary Cathode Lateral Insulated Gate Transistors

CMOS Compatible Shorted Anode Auxiliary Cathode Lateral Insulated Gate Bipolar Transistors

A novel heavily doped drift - auxiliary cathode lateral insulated gate transistor structure

Frequency-Response-Oriented Design and Optimization of N+ Diffusion Guard Ring in Lightly Doped CMOS Substrate

A Source Segmented LDMOS Structure for Improving Single Event Burnout Tolerance Based on High-Voltage BCD Process

A New Scheme of the Low-Cost Multiple-Node-Upset-Tolerant Latch

A Robust Hardened Latch Featuring Tolerance to Double-Node-Upset in 28nm CMOS for Spaceborne Application.