Abstract:We carried out evaporation experiments on a B-type calcium–aluminium-rich inclusion (CAI) melt in a gas-mixing aerodynamic levitation laser furnace, at 1873 K and an oxygen partial pressure of $10^{-9.1}$ atm, for durations ranging from 60 to 600 s. Evaporation of SiO2 and MgO follow the same trend as those observed in vacuum furnace experiments at the same temperature and starting composition, showing that their evaporation relative to one another from the melt is independent of pressure, oxygen fugacity, and hydrodynamical regime specific to the furnace. Isotopic ratios of Mg and Si in evaporation residues are used to derive fractionation factors of $\alpha ^{26/24}\mathrm{Mg}_{\mathrm{vap-liq}}=0.9906\pm 0.0004$ and $\alpha ^{30/28}\mathrm{Si}_{\mathrm{vap-liq}}=0.9943\pm 0.0003$, which are both significantly closer to unity than those found for evaporation in a vacuum, which translates to less isotope fractionation. The residues are also less isotopically fractionated than expected for cases in which transport of the gas species away from the melt is diffusion-controlled at 1-atm. By analysing the flow regimes in our furnace, we find that advection by the levitating gas is the primary mode of mass transport away from the melt surface, as opposed to diffusion-limited transport in a vacuum or 1-atm tube furnace. A modified Hertz–Knudsen–Langmuir formulation accounts for this process, and shows that isotopic fractionation of both Si and Mg reflect a saturation factor (ratio of the pressure of the evaporating species to vapour saturation pressure) equal to 0.75. This is in perfect accord with recent measurements of Cu isotopic fractionation using a similar furnace. The fact that three elements (Mg, Si, Cu) with varying equilibrium vapour pressures, activity coefficients in the liquid, and diffusion coefficients in the gas have the same scaling behaviour to saturation pressure is a strong indication that the mechanism controlling evaporation is driven by the hydrodynamical regime imposed in the furnace. Therefore, this class of experiments can be used to constrain processes in which advection dominates over diffusion, such as (but not limited to) planetary ejecta, tektites, giant impacts, nebular condensation in a turbulent flow, or nuclear fallout material. Finally, the possibility to reach high temperatures (in excess of 3500 K) in this furnace allows it to be used to evaluate the activity coefficients of melt components in extreme conditions relevant to molten planetary interiors (i.e., magma oceans), with a specific focus on refractory elements.

A small sealed Ta crucible for thermal analysis of volatile metallic samples

New apparatus for DTA at 2000 bar: thermodynamic studies on Au, Ag, Al and HTSC oxides

Eff ects of Diff erent Mechanical Alloying Parameters on Microstructure of High Temperature Nanocrystalline Cu-Ta Alloys

Cold Crucible Levitation Melting of Biomedical Ti-30 wt%Ta Alloy.

In-situ detection of nucleation in high temperature solutions

Measurements of the melting points, liquidus, and solidus of the Mo, Ta, and Mo Ta binary alloys using a novel high-speed pyrometric technique

A novel method for experiments in a one-atmosphere box furnace

In-situ observations of solidification process of Fe–Al–Ta eutectic alloy

Ingot Metallurgy and Microstructural Characterization of Ti–Ta Alloys

Preparation of Binary and Ternary Laves and μ-Phases in the Ta–Fe(–Al) System for Property Analysis at the Microscale

Development of a microfurnace dedicated to in situ scanning electron microscope observation up to 1300 °C. II. Study of the thermal response of samples

Atomic Absorption Determination of Lead, Bismuth, Selenium, Tellurium, Thallium and Tin in Complex Alloys Using Direct Atomization from Metal Chips in the Graphite Furnace

The Thermal Conductivity of Near-Eutectic Galinstan (Ga68.4In21.5Sn10) Molten Alloy

Evaporation of Al and microstructural variation in TiAl alloy during heat treatment

Thermal Analysis by Means of Differential Scanning Calorimetry of the Characteristic Thermodynamic Temperatures of a Cu-Zr-Al Bulk Metallic Glass

Experimental Investigation of Elemental and Isotopic Evaporation Processes by Laser Heating in an Aerodynamic Levitation Furnace

Isothermal furnace for long-term in situ and real-time X-radiography solidification experiments

Corelation between the crystallisation process and change in thermoelectromotive force for the amorphous alloy Fe89.8Ni1.5Si5.2B3C0.5

Water-cooling crucible vacuum induction melting of gamma-TiAl based alloys

Mechanical alloying and thermal analysis of Ta–Ti alloys

Development of the High‐Temperature Knudsen Effusion Mass Spectrometry in the Nordic Countries