Effects of extrusion temperature on microstructure evolution and mechanical properties of heterogeneous Mg−Gd alloy laminates via accumulated extrusion bonding
Shuai-shuai LIU,Han LIU,Bao-xuan ZHANG,Guang-sheng HUANG,Xiang CHEN,Ai-tao TANG,Bin JIANG,Fu-sheng PAN,Shuai-shuai LIU,Bao-xuan ZHANG,Guang-sheng HUANG,Ai-tao TANG,Bin JIANG,Fu-sheng PAN
DOI: https://doi.org/10.1016/s1003-6326(22)65940-5
IF: 3.752
2022-07-01
Transactions of Nonferrous Metals Society of China
Abstract:The influence of extrusion temperature on microstructure and mechanical properties of heterogeneous Mg−1Gd/Mg−13Gd laminate prepared by accumulated extrusion bonding was investigated. The results reveal that the Mg−1Gd/Mg−13Gd laminate forms a significant difference in grain size between the successive layers when extruded at 330 °C, and this difference gradually disappears as the extrusion temperature increases from 380 to 430 °C. Besides, the growth rate of recrystallized grains in fine-grained layers is faster than that in coarse-grained layers. Moreover, the diffusion ability of Gd element increases with elevating extrusion temperatures, promoting the increase and coarsening of precipitates in fine-grained layers. Tensile tests indicate that the sample extruded at 380 °C has a superior combination of strength and ductility. This is mainly attributed to the synergy of the heterogeneous texture between coarse and fine-grained layers, hetero-deformation induced strengthening and hardening. The fine-grained layers facilitate the activation of prismatic 〈a〉 slips, while coarse-grained layers make it easier to active basal 〈a〉 and pyramidal 〈c+a〉 slips, especially for the sample extruded at 380 °C. The activation of pyramidal 〈c+a〉 slips contributes to coordinating further plastic deformation.
metallurgy & metallurgical engineering