Abstract:Textures and residual stresses are generated during electrodeposition of chromium coatings, which directly affect the performance of the coating. In this work, the variations of texture, hydrogen content, residual stress, microhardness and corrosion resistance of chromium deposited from hexavalent [Cr(VI)] chromium bath using direct current deposited technique were investigated. Electrodeposition experiments were carried out on the low carbon steel substrate by varying the key variable current density. The macrotexture of the coatings was studied by XRD. The crystal orientation and dislocation density were analyzed by EBSD. Residual stress was measured by the indentation method. The research demonstrated that a single preferred orientation on the (222) plane was found at current densities of 20 A/dm 2 , 35 A/dm 2 and 50 A/dm 2 . At 40 A/dm 2 , a mixed preferred orientation on the (222) + (211) planes was discovered. Furthermore, the formation of the chromium coating texture was affected by the variation of hydrogen content, for higher hydrogen promoting grain growth along the (222) crystal plane. Notably, the microstructure-property relationship was developed. At the single preferred orientation of (222) plane, the corrosion resistance was more favorable. At the mixed preferred orientation of (222) + (211) planes, the coating surface achieved higher microhardness, but formed higher residual stress and more microcracks. Moreover, the better electroplating parameter was proposed. At 35 A/dm 2 , the coating had the fewer microcracks and the better overall performance. The higher microhardness of 753 HV was found. The more favorable corrosion resistance was discovered, with the breakdown potential and passive current density of 804.7 mV and 2.220 × 10 −6 A/dm 2 . The lower residual stress of 61 MPa was found, which was about 81 % lower than the maximum stress. It was significant in industry for the enhancement of the service life of substrate and the optimization of the chromium coating process.

Effect of hard chrome plating parameters on the wear resistance of low carbon steel

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

Pengaruh Arus Dan Waktu pelapisan hard chrome terhadap ketebalan lapisan dan tingkat kekerasan mikro pada plat baja karbon rendah aisi 1026 dengan menggunakan cro3 250 gr/lt dan h2so4 2,5 gr/lt pada proses elektroplating

Effect Of Processing Parameters On Microstructure And Properties Of Steel-Based Chromium Plating

Engineering Properties of Chromium Plating and Electroless and Electroplated Nickel

The effect of distance variation on electroplating process of decorative nickel-chrome on the microstructure, thickness and weight of plating on A36 steel

The effect of hard chrome plating on iron fines formation

Analysis of thin film electrochemical deposition process diffused by carbon tool steels

Wear Behaviour of Hard Chrome and Tungsten Carbide-HVOF Coatings

Dry sliding wear behavior of hard-chrome and zinc-phosphate conversion coatings on steel substrates

Ni-Ce-P Electroless Plating and Properties of the Coating on 27simn Steel

Surface Topological Investigation of Seal Bushing by Using Chromium Plating Process

The Effect of Various Surface Treatments in Cleaning and Preparing Copper, Nickel and Steel for Chromium Plating

Effect of Heat Treatment on Chemical Plating of Ni-Cr-P on 65Mn Alloy Steel

Tribological Study of Thin-Electroplated Chromium: Evaluation of Wear Rate as a Function of Surface Roughness

A Study on the Influence of the Electroplating Process on the Corrosion Resistance of Zinc-Based Alloy Coatings

Relationship between Texture, Hydrogen Content, Residual Stress and Corrosion Resistance of Electrodeposited Chromium Coating: Influence of Heat Treatment

Optimization of Zn-Cr proportions for hybrid multilayer electroplating of AISI 1045 steel – towards super-hydrophobicity and anti-corrosive nature

Hard chromium composite electroplating on high-strength stainless steel from a Cr(III)-ionic liquid solution

Effect of current density on the texture, residual stress, microhardness and corrosion resistance of electrodeposited chromium coating

Enhancement in Corrosion Resistance of Low-Carbon Steel via Surface Modification