Abstract:Based on efficiency and environmental concerns, the development of porous carbon from waste and biomass materials has attracted extensive attention as a novel approach. In this study, poplar sawdust was an inexpensive carbon precursor, sulfur-containing waste liquid (SCWL) was used as a modifier to turn waste into treasure, and potassium oxalate (K2C2O4) was a mild activator, successfully prepared N, S, O co-doped new porous activated carbon with excellent CO2 capture performance. The heteroatom doping and pore structure can be controlled by using SCWL and K2C2O4, and adjusting the activation temperature. The best sample (PCSK-2-3-800) prepared with SCWL and K2C2O4 showed excellent CO2 adsorption performance, reaching 3.82 and 5.61 mmol/g under normal pressure at 25 and 0 °C, respectively. This is attributed to the synergy of porous structure and surface chemistry. The pore structure parameter results showed that K2C2O4 promotes the development of activated carbon pore structure. The specific surface area, micropore volume and narrow micropore volume of PCSK-2-3-800 are 1418 m2/g, 0.55 cm3/g and 0.43 mL/g, respectively. The characterization results of FTIR and XPS showed that the addition of SCWL can successfully introduce heteroatoms into the carbon skeleton, and form CO2-philic active sites on the surface of the porous carbon. Both aspects promoted the adsorption of CO2. In addition, the PCSK-2-3-800 sample has a moderate adsorption heat of 27.13 kJ/mmol, good adsorption selectivity of CO2 and N2 is 13, and excellent recyclability, which is very promising for CO2 separation or storage. This paper develops a sustainable scheme for the first-time using biomass and SCWL to develop a new solid carbon adsorbent, which provides useful information and inspiration for capturing CO2.

Waste foam to upcycled sponge-like porous carbon composites for efficient CO 2 capture and conversion

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Hollow branched fiber hierarchical porous carbon as recyclable adsorbents and catalysts for efficient CO2 capture and conversion

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Engineering Porous Organic Polymers for Carbon Dioxide Capture

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Recent advancements in sustainable upcycling of solid waste into porous carbons for carbon dioxide capture

Developing Hierarchically Ultra-Micro/mesoporous Biocarbons for Highly Selective Carbon Dioxide Adsorption

Biomass-based N-rich porous carbon materials for CO2 capture and in situ conversion.

Hierarchical porous composites derived from spent tire char for CO 2 capture: K-N co-doped, process intensification and thermodynamic analysis

CO2 Adsorption Mechanisms on Activated Nano-Sized Biocarbons: Investigation Through in Situ DRIFTS, Quasi In-Situ XPS and XRD

Highly Selective CO2 Capture on Waste Polyurethane Foam-Based Activated Carbon

Sustainable Hierarchical Porous Carbon Aerogel from Cellulose for High-Performance Supercapacitor and Co2 Capture

Recent Progress in Porous Organic Polymers and Their Application for CO 2 Capture

Multi-walled carbon nanotubes/carbon foam nanocomposites derived from biomass for CO2 capture and supercapacitor applications

Enhanced capture of waste and diluted CO2 by N/O-rich multilayered ultramicropores bio-carbon composites materials

Porous Carbon for CO2 Capture Technology: Unveiling Fundamentals and Innovations

Coassisted Carbonization with HCOOK/(HCOO)2Ca for the Fabrication of Bamboo-Derived Oxygen-Doped Porous Carbons Exhibiting High-Performance Sorption of Diethyl Phthalate from Aqueous Solutions.

Synthesis and characterization of waste Styrofoam hypercrosslinked polymer as an adsorbent for CO2 capture

Controllable Synthesis of a Robust Sucrose-Derived Bio-Carbon Foam with 3D Hierarchical Porous Structure for Thermal Insulation, Flame Retardancy and Oil Absorption

Facile Synthesis of Structured Adsorbent with Enhanced Hydrophobicity and Low Energy Consumption for CO2 Capture from the Air