Abstract:Based on efficiency and environmental concerns, the development of porous carbon from waste and biomass materials has attracted extensive attention as a novel approach. In this study, poplar sawdust was an inexpensive carbon precursor, sulfur-containing waste liquid (SCWL) was used as a modifier to turn waste into treasure, and potassium oxalate (K2C2O4) was a mild activator, successfully prepared N, S, O co-doped new porous activated carbon with excellent CO2 capture performance. The heteroatom doping and pore structure can be controlled by using SCWL and K2C2O4, and adjusting the activation temperature. The best sample (PCSK-2-3-800) prepared with SCWL and K2C2O4 showed excellent CO2 adsorption performance, reaching 3.82 and 5.61 mmol/g under normal pressure at 25 and 0 °C, respectively. This is attributed to the synergy of porous structure and surface chemistry. The pore structure parameter results showed that K2C2O4 promotes the development of activated carbon pore structure. The specific surface area, micropore volume and narrow micropore volume of PCSK-2-3-800 are 1418 m2/g, 0.55 cm3/g and 0.43 mL/g, respectively. The characterization results of FTIR and XPS showed that the addition of SCWL can successfully introduce heteroatoms into the carbon skeleton, and form CO2-philic active sites on the surface of the porous carbon. Both aspects promoted the adsorption of CO2. In addition, the PCSK-2-3-800 sample has a moderate adsorption heat of 27.13 kJ/mmol, good adsorption selectivity of CO2 and N2 is 13, and excellent recyclability, which is very promising for CO2 separation or storage. This paper develops a sustainable scheme for the first-time using biomass and SCWL to develop a new solid carbon adsorbent, which provides useful information and inspiration for capturing CO2.

Synthesis and characterization of waste Styrofoam hypercrosslinked polymer as an adsorbent for CO2 capture

Recycling Plastic Waste for Environmental Remediation in Water Purification and CO2 Capture

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

A Porous Carbon with Excellent Gas Storage Properties from Waste Polystyrene

Waste foam to upcycled sponge-like porous carbon composites for efficient CO 2 capture and conversion

A novel amine functionalized porous geopolymer spheres from municipal solid waste incineration fly ash for CO2 capture

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Synthesis of a Bio-Based and Intrinsically Anti-Flammable Epoxy Thermoset and the Application of Its Carbonized Foam As an Efficient CO2 Capture Adsorbent

Development and characterization of amine-functionalized hyper-cross-linked resin for CO2 capture

A Soluble and Recyclable Polymeric Adsorbent of Intrinsic Microporosity for CO2 Capture

Hierarchical porous polystyrene-based activated carbon spheres for CO2 capture

Synthesis and characterization of Benzyl chloride-based hypercrosslinked polymers and its amine-modification as an adsorbent for CO2 capture

Highly Selective CO2 Capture on Waste Polyurethane Foam-Based Activated Carbon

Microenvironment modulation of interpenetrating-type hierarchical porous foam carbon by mild-homogeneous activation for H2 storage and CO2 capture under ambient pressure

Green synthesis of hypercrosslinked polymers for CO2 capture and conversion: Recent advances, opportunities, and challenges

Biobased hierarchically porous carbon featuring micron-sized honeycomb architecture for CO2 capture and water remediation

One-step synthesis of N-containing hyper-cross-linked polymers by two crosslinking strategies and their CO2 adsorption and iodine vapor capture

Porous organic polymers from cashew nut shell liquid: Derived carbonized material for carbon dioxide capture

Hollow branched fiber hierarchical porous carbon as recyclable adsorbents and catalysts for efficient CO2 capture and conversion

Solution-reprocessable polymers of intrinsic microporosity as adsorbents for carbon dioxide capture

Synthesis, characterization, thermal stability, and application of microporous hyper cross-linked polyphosphazenes with naphthylamine group for CO 2 uptake