Abstract:Based on efficiency and environmental concerns, the development of porous carbon from waste and biomass materials has attracted extensive attention as a novel approach. In this study, poplar sawdust was an inexpensive carbon precursor, sulfur-containing waste liquid (SCWL) was used as a modifier to turn waste into treasure, and potassium oxalate (K2C2O4) was a mild activator, successfully prepared N, S, O co-doped new porous activated carbon with excellent CO2 capture performance. The heteroatom doping and pore structure can be controlled by using SCWL and K2C2O4, and adjusting the activation temperature. The best sample (PCSK-2-3-800) prepared with SCWL and K2C2O4 showed excellent CO2 adsorption performance, reaching 3.82 and 5.61 mmol/g under normal pressure at 25 and 0 °C, respectively. This is attributed to the synergy of porous structure and surface chemistry. The pore structure parameter results showed that K2C2O4 promotes the development of activated carbon pore structure. The specific surface area, micropore volume and narrow micropore volume of PCSK-2-3-800 are 1418 m2/g, 0.55 cm3/g and 0.43 mL/g, respectively. The characterization results of FTIR and XPS showed that the addition of SCWL can successfully introduce heteroatoms into the carbon skeleton, and form CO2-philic active sites on the surface of the porous carbon. Both aspects promoted the adsorption of CO2. In addition, the PCSK-2-3-800 sample has a moderate adsorption heat of 27.13 kJ/mmol, good adsorption selectivity of CO2 and N2 is 13, and excellent recyclability, which is very promising for CO2 separation or storage. This paper develops a sustainable scheme for the first-time using biomass and SCWL to develop a new solid carbon adsorbent, which provides useful information and inspiration for capturing CO2.

Biobased hierarchically porous carbon featuring micron-sized honeycomb architecture for CO2 capture and water remediation

Facile, Low-Cost, and Sustainable Preparation of Hierarchical Porous Carbons from Ion Exchange Resin: an Improved Potassium Activation Strategy

Microporous carbon nanoflakes derived from biomass cork waste for CO2 capture

Highly porous carbon derived from hydrothermal-pyrolysis synergistic carbonization of biomass for enhanced CO 2 capture

Production of Hierarchically Porous Carbon from Natural Biomass Waste for Efficient Organic Contaminants Adsorption

Sustainable hierarchically porous carbons from bio-oil to remove emerging contaminants

Cooperative Pollutant Adsorption and Persulfate-Driven Oxidation on Hierarchically-Ordered Porous Carbon.

Sorghum-Waste-Derived High-Surface Area KOH-Activated Porous Carbon for Highly Efficient Methylene Blue and Pb(II) Removal.

Easily tunable hydrogel-derived heteroatom-doped hierarchically porous carbons as multifunctional materials for supercapacitors, CO 2 capture and dye removal

Synthesis of hierarchically porous carbon materials by zinc salts-assisted carbonization of biomass and organic solid wastes

Design of biomass-based N, S co-doped porous carbon via a straightforward post-treatment strategy for enhanced CO2 capture performance

Selectable Microporous Carbons Derived from Poplar Wood by Three Preparation Routes for CO 2 Capture

Ultra-highly porous carbon from Wasted soybean residue with tailored porosity and doped structure as renewable multi-purpose absorbent for efficient CO2, toluene and water vapor capture

Selectable Microporous Carbons Derived from Poplar Wood by Three Preparation Routes for CO2 Capture.

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Sustainable Porous Carbon Materials Derived from Wood-Based Biopolymers for CO2 Capture

Template-free Synthesis of Hierarchical Porous Carbon with Controlled Morphology for CO2 Efficient Capture

Facile Synthesis of Structured Adsorbent with Enhanced Hydrophobicity and Low Energy Consumption for CO2 Capture from the Air

Scalable synthesis of biomass-derived three-dimensional hierarchical porous activated carbons for electrochemical energy storage and hydrogen physisorption

Non-cationic hyper-crosslinked ionic polymers with hierarchically ordered porous structures: facile synthesis and applications for highly efficient CO 2 capture and conversion

Biomass-based N-rich porous carbon materials for CO2 capture and in situ conversion.