Abstract:In this manuscript, N-doped porous carbonaceous CO2 sorbents were synthesized using biomass waste hazelnut shell as the raw materials, melamine as the nitridation agent, and KOH as the porogen. The resultant materials were carefully characterized by different techniques, and the results show that these samples possess a high amount of N content and highly developed porous structure. As a result, high CO2 adsorption capacities were found for this series of sorbents, up to 4.23 and 6.34 mmol/g at 1 bar and 25 and 0 °C, respectively. Comprehensive investigation indicates that, in addition to the well-known narrow microporosity and N content, the pore size distribution of the adsorbent also plays an important role in dictating the CO2 uptake under ambient conditions. Thus, it is proposed that the joint effect of the above three factors dictates the CO2 adsorption capacity of these sorbents. Moreover, these sorbents exhibit many other exceptional CO2 adsorption properties, such as stable recyclability, fast adsorption kinetics, suitable heat of adsorption, high CO2/N2 selectivity, and good dynamic CO2 capture capacity. The wide availability and low cost of raw materials together with a straightforward synthesis procedure and excellent performance disclose the high potential of hazelnut-shell-derived carbons in CO2 capture.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c03832?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c03832</a>.Detailed material synthesis, characterization, adsorption measurement of sorbents, schematic diagram of the CO2 capture system (Scheme S1), Raman spectra of HSM-550-2 (Figure S1), plots of each porous property characteristic and nitrogen content versus CO2 uptake (Figure S2), PSD curves of sorbents (Figure S3), and comparison of the CO2 uptake for various adsorbents (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c03832/suppl_file/ef0c03832_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Selectable Microporous Carbons Derived from Poplar Wood by Three Preparation Routes for CO 2 Capture

Selectable Microporous Carbons Derived from Poplar Wood by Three Preparation Routes for CO2 Capture.

Superior Carbon-Based CO2 Adsorbents Prepared from Poplar Anthers

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Developing Hierarchically Ultra-Micro/mesoporous Biocarbons for Highly Selective Carbon Dioxide Adsorption

High-value utilization of lignin to prepare N,O-codoped porous carbon as a high-performance adsorbent for carbon dioxide capture

Underlying mechanism of CO2 uptake onto biomass-based porous carbons: Do adsorbents capture CO2 chiefly through narrow micropores?

N, S, O Co-Doped Porous Carbons Derived from Bio-Based Polybenzoxazine for Efficient CO2 Capture

Sustainable Porous Carbon Materials Derived from Wood-Based Biopolymers for CO2 Capture

Synthesis and characterization of advanced bio-carbon materials from Kraft lignin with enhanced CO2 capture properties

Lignin-Derived Porous Carbons for Efficient Co2 Adsorption

Microporous carbon nanoflakes derived from biomass cork waste for CO2 capture

The Resource Utilization of Poplar Leaves for CO2 Adsorption

Insights into Mechanochemical Assisted Preparation of Lignin-Based N-Doped Porous Carbon with Tunable Porosity and Ultrahigh Surface Oxygen Content for Efficient Co2 Capture

Design of biomass-based N, S co-doped porous carbon via a straightforward post-treatment strategy for enhanced CO2 capture performance

Biomass Based N/O Codoped Porous Carbons with Abundant Ultramicropores for Highly Selective CO2 Adsorption

Targeted Enhancement of Ultra-Micropore in Highly Oxygen-Doped Carbon Derived from Biomass for Efficient CO2 Capture: Insights from Experimental and Molecular Simulation Studies

N-doped Highly Microporous Carbon Derived from the Self-Assembled Lignin/chitosan Composites Beads for Selective CO2 Capture and Efficient P-Nitrophenol Adsorption

Highly Efficient Nitrogen-Doped Porous Carbonaceous CO 2 Adsorbents Derived from Biomass