Abstract:In order to reverse the trend of increasing carbon dioxide (CO2) emissions, the development of efficient and economical CO2 trapping agents is an urgent necessity for the sustainable development of industry. In this paper, hierarchical porous hydroxyl aluminum oxide (AlOOH) hollow microspheres with controllable structure and morphology were prepared by conventional hydrothermal synthesis using malonic acid as a structure guiding agent. Then, potassium carbonate (K2CO3) based adsorbents were prepared using AlOOH hollow microspheres as supports, and their CO2 trapping performance was assessed by simulating industrial flue gas flow in a fixed bed. The results show that the loading of K2CO3, the pore structure, and the surface basic site of the adsorbent have a significant influence on the trapping performance of CO2. Among the prepared K2CO3/AlOOH adsorbents, 30 wt% K2CO3/AlOOH adsorbent has the best CO2 capture ability, which is about 2.15 times higher than that of K2CO3/C–Al2O3 adsorbent prepared from commercial alumina (C–Al2O3). There may be two explanations for this. Firstly, it may be due to the nanostructured shell and hierarchical porous structure of the adsorbent, which reduces the intra-particle diffusion resistance of CO2, and secondly, it may be due to the suitable surface basic sites of the adsorbent. In addition, the adsorbent was regenerated at 120 °C after trapping CO2, and then CO2 was captured in a cycle. It was found that the CO2 capture capability of the adsorbent did not decrease significantly after 10 cycles. In this work, an excellent technique for preparing porous honeycomb adsorbents with suitable surface basic sites has been devised, which provides a creative strategy for capturing and utilizing CO2.

Hierarchical porous polystyrene-based activated carbon spheres for CO2 capture

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

Nitrogen-doped hierarchically porous carbon spheres for low concentration CO2 capture

Preparation and characterisation of carbon spheres for carbon dioxide capture

Enhanced CO2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite

Nitrogen-enriched and Hierarchically Porous Carbon Macro-Spheres – Ideal for Large-Scale CO2 Capture

Porous Hollow CaO Microsphere Synthesized by the Template-Assisted Approach for Enhanced CO2 Capture

Efficient Capture of CO2 over Ordered Micro-Mesoporous Hybrid Carbon Nanosphere

User-Friendly Synthesis Of Nitrogen-Containing Polymer And Microporous Carbon Spheres For Efficient Co2 Capture

In-situ Co-Growth of ZIF-8-derived Bio-Carbon Spheres with Meso-Macroporous Hierarchy for Stable and Rapid Carbon Dioxide Capture

High Density and Super Ultra‐Microporous‐Activated Carbon Macrospheres with High Volumetric Capacity for CO2 Capture

Facile Synthesis of Structured Adsorbent with Enhanced Hydrophobicity and Low Energy Consumption for CO2 Capture from the Air

Polybenzoxazine-Based Monodisperse Carbon Spheres With Low-Thermal Shrinkage And Their Co2 Adsorption Properties

Triazine-based Hyper-Cross-linked Polymers with Inorganic-Organic Hybrid Framework Derived Porous Carbons for CO2 Capture

Hierarchical porous AlOOH hollow microspheres for efficient CO2 capture

Synthesis and characterization of polyphenylene sulfide resin-derived S-doped porous carbons for efficient CO 2 capture

Polyvinyl Chloride‐Derived Carbon Spheres for CO 2 Adsorption

Design of biomass-based N, S co-doped porous carbon via a straightforward post-treatment strategy for enhanced CO2 capture performance

Microenvironment modulation of interpenetrating-type hierarchical porous foam carbon by mild-homogeneous activation for H2 storage and CO2 capture under ambient pressure

Facile synthesis of porous carbon nitride spheres with hierarchical three-dimensional mesostructures for CO 2 capture

Nitrogen-rich hollow carbon microspheres with tunable shell thicknesses for enhanced CO2 adsorption