Abstract:Based on efficiency and environmental concerns, the development of porous carbon from waste and biomass materials has attracted extensive attention as a novel approach. In this study, poplar sawdust was an inexpensive carbon precursor, sulfur-containing waste liquid (SCWL) was used as a modifier to turn waste into treasure, and potassium oxalate (K2C2O4) was a mild activator, successfully prepared N, S, O co-doped new porous activated carbon with excellent CO2 capture performance. The heteroatom doping and pore structure can be controlled by using SCWL and K2C2O4, and adjusting the activation temperature. The best sample (PCSK-2-3-800) prepared with SCWL and K2C2O4 showed excellent CO2 adsorption performance, reaching 3.82 and 5.61 mmol/g under normal pressure at 25 and 0 °C, respectively. This is attributed to the synergy of porous structure and surface chemistry. The pore structure parameter results showed that K2C2O4 promotes the development of activated carbon pore structure. The specific surface area, micropore volume and narrow micropore volume of PCSK-2-3-800 are 1418 m2/g, 0.55 cm3/g and 0.43 mL/g, respectively. The characterization results of FTIR and XPS showed that the addition of SCWL can successfully introduce heteroatoms into the carbon skeleton, and form CO2-philic active sites on the surface of the porous carbon. Both aspects promoted the adsorption of CO2. In addition, the PCSK-2-3-800 sample has a moderate adsorption heat of 27.13 kJ/mmol, good adsorption selectivity of CO2 and N2 is 13, and excellent recyclability, which is very promising for CO2 separation or storage. This paper develops a sustainable scheme for the first-time using biomass and SCWL to develop a new solid carbon adsorbent, which provides useful information and inspiration for capturing CO2.

Polyvinyl Chloride‐Derived Carbon Spheres for CO 2 Adsorption

Synthesis and CO2 Capture Behavior of Porous Cross-Linked Polymers Containing Pendant Triazole Groups

Polyvinyl chloride (PVC) derived microporous carbons prepared via hydrothermal dechlorination and potassium hydroxide activation for efficient CO 2 capture

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Hierarchical porous polystyrene-based activated carbon spheres for CO2 capture

Preparation of CPVC-based activated carbon spheres and insight into the adsorption-desorption performance for typical volatile organic compounds

Characterization of solid and liquid carbonization products of polyvinyl chloride (PVC) and investigation of the PVC-derived adsorbent for the removal of organic compounds from water

Engineering Porous Organic Polymers for Carbon Dioxide Capture

From polyvinyl chloride waste to activated carbons: the role of occurring additives on porosity development and gas adsorption properties

Solving two environmental problems simultaneously:Microporous carbon derived from mixed plastic waste for CO 2 capture

A Soluble and Recyclable Polymeric Adsorbent of Intrinsic Microporosity for CO2 Capture

Preparation and characterisation of carbon spheres for carbon dioxide capture

Porous Polymers and Porous Carbons for CO2 Capture and VOC Removal

A molecular-templating strategy to polyamine-incorporated porous organic polymers for unprecedented CO 2 capture and separation

Low Temperature and Facile Synthesis of Nitrogen-Doped Hierarchical Porous Carbon Derived from Waste Polyethylene Terephthalate for Efficient CO2 Capture

Low temperature and facile synthesis of nitrogen-doped hierarchical porous carbon derived from waste polyethylene terephthalate for efficient CO 2 capture

Porous Polymer Supported Amino Functionalized Ionic Liquid for Effective CO2 Capture

Nitrogen-doped hierarchically porous carbon spheres for low concentration CO2 capture

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture