Abstract:In this study, a facile strategy is reported for the preparation of porous carbon materials with adjustable pore size through carbonization of MOF-5 at 900 degrees C with the assistance of different additives. Results show that the physical and chemical properties (such as morphology, carbon defect content, BET specific surface area, pore structure) of the porous carbon materials can be adjusted through introduction of different compounds (i.e., C16H32O2, C6H14O6, C18H36O2, Na2CO3, KOH, Cu(NO3)2, NaCl, KCl, MgCl2, ethyl cellulose) during the carbon-ization processes. CO2 adsorption experiment results show that there is a linear relationship between the CO2 adsorption capacity (at 25 degrees C and 0.15 bar) and the cumulative pore volume of pores at 5-7 angstrom, suggesting that pores in the range of 5-7 angstrom play a major role in CO2 adsorption at such condition. While the CO2 adsorption capacity (at 25 degrees C and 0.15 bar) is independent on the BET specific surface area of the materials. Among the prepared porous carbon materials, 5C-C6H14O6-900 exhibits the highest CO2 adsorption capacity (i.e., 3.32 mmol/g at 25 degrees C and 1 bar, 0.88 mmol/g at 25 degrees C and 0.15 bar), with good adsorption/desorption cycle stability and CO2/N2 selectivity. Our work provides a facile and general method to adjust and control the pore size dis-tribution of MOF-derived porous carbon materials. Besides, the analysis results indicate that the micropores in a specific pore size range play a decisive role in the adsorption of CO2 at low pressure, which provides a new idea for the preparation of high-efficiency adsorbents at low pressures.

Preparation and characterisation of carbon spheres for carbon dioxide capture

Preparation of cage-like nano-CaCO3 hollow spheres for enhanced CO2 sorption

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

Hierarchical porous polystyrene-based activated carbon spheres for CO2 capture

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

CO2 Sorbents Based on Spherical Carbon and Photoactive Metal Oxides: Insight into Adsorption Capacity, Selectivity and Regenerability

Nitrogen-doped hierarchically porous carbon spheres for low concentration CO2 capture

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Facile and Environmentally Friendly Synthesis of Ultramicroporous Carbon Spheres: A Significant Improvement in CVD Method

Carbon aerogels in the form of microspheres and their potential application in CO2 adsorption: A thermodynamic and kinetic study

Polyvinyl Chloride‐Derived Carbon Spheres for CO 2 Adsorption

Design of Porous Carbon Adsorbents from Ethylene Glycol for Selective CO2 Adsorption

Sustainable Biomass Glucose-Derived Porous Carbon Spheres with High Nitrogen Doping: As a Promising Adsorbent for CO2/CH4/N2 Adsorptive Separation

Facile synthesis of porous carbon nitride spheres with hierarchical three-dimensional mesostructures for CO 2 capture

Design of biomass-based N, S co-doped porous carbon via a straightforward post-treatment strategy for enhanced CO2 capture performance

Biomass-based N-rich porous carbon materials for CO2 capture and in situ conversion.

Synthesis and characterization of polyphenylene sulfide resin-derived S-doped porous carbons for efficient CO 2 capture

Large-scale synthesis and characterization of carbon spheres prepared by direct pyrolysis of hydrocarbons

Facile preparation of N-doped porous carbon and its CO2 gas adsorption performance

Selectable Microporous Carbons Derived from Poplar Wood by Three Preparation Routes for CO 2 Capture

Sulfur-Doped porous carbon Adsorbent: A promising solution for effective and selective CO 2 capture