Abstract:Low-cost nitrogen-enriched activated carbons (PNACs) with high microporosity were prepared by a simple one-step activation doping process using KOH as a chemical activator and melamine formaldehyde (MF) as a nitrogen source. These PNACs have shown great potential as effective CO 2 adsorbents. The resulting PNACs were mainly microporous structure, with surface areas ranging from 736 to 2144 m 2 /g and total pore volumes ranging from 0.565 to 1.366 cm 3 /g. The CO 2 adsorption capacities of PNACs were in the range of 2.353 to 6.068 mmol/g and 1.59 to 4.131 mmol/g at 0 °C and 25 °C under 1 bar, respectively. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The experimental isotherm data were analyzed using various equations and the Toth isotherm equation was found to be the most accurate mathematical model to describe the CO 2 adsorption isotherm of the activated carbon. This result further confirms that PNACs have a non-homogeneous pore structure. Additionally, the CO 2 /N 2 selectivity of the PNACs ranges from 11.15 to 26.86 at a CO 2 partial pressure of 0.1 bar. The exceptional CO 2 adsorption properties can be attributed to the high microporosity and nitrogen content of the PNACs. The relationship between the physicochemical properties and CO 2 adsorption performance of the activated carbon was further investigated by relevance analysis. At 0 °C and 1 bar, it was observed that the pore structure played a predominant role in the CO 2 adsorption process of PNACs. During this condition, PNACs mainly exhibited physical adsorption, which was primarily governed by the microporous filling mechanism. However, at 25 °C and 1 bar, both microporosity and nitrogen content contribute equally to the CO 2 adsorption effect. This observation confirms that the pore structure and nitrogen functional groups work synergistically to influence the CO 2 adsorption performance of PNACs. The adsorption mechanism of PNACs can be described as physical adsorption, driven by the cooperation between nitrogen functional groups and the filling of micropores. This innovative one-step activation doping process successfully converts agricultural and plastic waste into sustainable and high-performance CO 2 adsorbents. It provides new insights for mitigating the greenhouse effect and addressing the issue of plastic pollution.

Solving two environmental problems simultaneously:Microporous carbon derived from mixed plastic waste for CO 2 capture

Optimal Activation of Porous Carbon for High Performance CO2 Capture

Optimized preparation of multi-matrix activated carbon for CO 2 capture by response surface methodology: The advantages of co-pyrolysis of biomass and plastics

Household mixed plastic waste derived adsorbents for CO 2 capture: A feasibility study

Development and CO2 capture of nitrogen-enriched microporous carbon by coupling waste polyamides with lignocellulosic biomass

Diamond in the rough: Polishing waste polyethylene terephthalate into activated carbon for CO2 capture

Low temperature and facile synthesis of nitrogen-doped hierarchical porous carbon derived from waste polyethylene terephthalate for efficient CO 2 capture

Low Temperature and Facile Synthesis of Nitrogen-Doped Hierarchical Porous Carbon Derived from Waste Polyethylene Terephthalate for Efficient CO2 Capture

From polyvinyl chloride waste to activated carbons: the role of occurring additives on porosity development and gas adsorption properties

Engineering Porous Organic Polymers for Carbon Dioxide Capture

Solution-reprocessable polymers of intrinsic microporosity as adsorbents for carbon dioxide capture

Resorcinol–formaldehyde Resin-Based Porous Carbon Spheres with High CO2 Capture Capacities

Biomass-based N-rich porous carbon materials for CO2 capture and in situ conversion.

Polyvinyl chloride (PVC) derived microporous carbons prepared via hydrothermal dechlorination and potassium hydroxide activation for efficient CO 2 capture

Co-pyrolysis of cyanobacteria and plastics to synthesize porous carbon and its application in methylene blue adsorption

A Soluble and Recyclable Polymeric Adsorbent of Intrinsic Microporosity for CO2 Capture

Enhance Pore Structure of Cyanobacteria-Based Porous Carbon by Polypropylene to Improve Adsorption Capacity of Methylene Blue.

Novel nitrogen-enriched activated carbon with tunable microporosity from Agricultural and Plastic Waste for CO 2 adsorption

Hierarchical porous composites derived from spent tire char for CO 2 capture: K-N co-doped, process intensification and thermodynamic analysis

Potassium citrate-derived porous carbon with high CO2 capture and Congo red adsorption performance

Mesoporous Carbon Stabilized MgO Nanoparticles Synthesized by Pyrolysis of MgCl2 Preloaded Waste Biomass for Highly Efficient CO2 Capture.