Abstract:Based on efficiency and environmental concerns, the development of porous carbon from waste and biomass materials has attracted extensive attention as a novel approach. In this study, poplar sawdust was an inexpensive carbon precursor, sulfur-containing waste liquid (SCWL) was used as a modifier to turn waste into treasure, and potassium oxalate (K2C2O4) was a mild activator, successfully prepared N, S, O co-doped new porous activated carbon with excellent CO2 capture performance. The heteroatom doping and pore structure can be controlled by using SCWL and K2C2O4, and adjusting the activation temperature. The best sample (PCSK-2-3-800) prepared with SCWL and K2C2O4 showed excellent CO2 adsorption performance, reaching 3.82 and 5.61 mmol/g under normal pressure at 25 and 0 °C, respectively. This is attributed to the synergy of porous structure and surface chemistry. The pore structure parameter results showed that K2C2O4 promotes the development of activated carbon pore structure. The specific surface area, micropore volume and narrow micropore volume of PCSK-2-3-800 are 1418 m2/g, 0.55 cm3/g and 0.43 mL/g, respectively. The characterization results of FTIR and XPS showed that the addition of SCWL can successfully introduce heteroatoms into the carbon skeleton, and form CO2-philic active sites on the surface of the porous carbon. Both aspects promoted the adsorption of CO2. In addition, the PCSK-2-3-800 sample has a moderate adsorption heat of 27.13 kJ/mmol, good adsorption selectivity of CO2 and N2 is 13, and excellent recyclability, which is very promising for CO2 separation or storage. This paper develops a sustainable scheme for the first-time using biomass and SCWL to develop a new solid carbon adsorbent, which provides useful information and inspiration for capturing CO2.

Hierarchical porous composites derived from spent tire char for CO 2 capture: K-N co-doped, process intensification and thermodynamic analysis

Development of CO<sub>2</sub> adsorption materials from recycling spent tire char via orthogonal design: Optimal solution and thermodynamic evaluation

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Efficiently treating waste nylon-tire to prepare sulfur and nitrogen doped porous carbon material via pyrolysis and activation

Hierarchical Porous Carbon As a Highly Efficient Adsorbent for Toluene and Benzene

Co-pyrolysis of Corn Stover and Waste Tire: Pyrolysis Behavior and Kinetic Study Based on Fraser-Suzuki Deconvolution Procedure

Synthesis of N-doped Hierarchical Porous Carbon with Excellent Toluene Adsorption Properties and Its Activation Mechanism

An Efficient Biochar Adsorbent for CO2 Capture: Combined Experimental and Theoretical Study on the Promotion Mechanism of N-doping

Low temperature and facile synthesis of nitrogen-doped hierarchical porous carbon derived from waste polyethylene terephthalate for efficient CO 2 capture

Low Temperature and Facile Synthesis of Nitrogen-Doped Hierarchical Porous Carbon Derived from Waste Polyethylene Terephthalate for Efficient CO2 Capture

Waste foam to upcycled sponge-like porous carbon composites for efficient CO 2 capture and conversion

Activation of pyrolytic chars derived from used tires

Solving two environmental problems simultaneously:Microporous carbon derived from mixed plastic waste for CO 2 capture

Targeted Construction of Porous Biochar with Well-Developed Pore Structure for High-Performance Co2 Adsorption

CHARACTERIZATIONS AND ACTIVATION STUDY OF CHAR FROM PYROLYSIS OF USED TIRES

Conversion of Pyrolytic Chars from Used Tires to Activated Carbon

Gasification kinetics of waste tire char with CO2

Properties of Pyrolytic Chars and Activated Carbons Derived from Pilot-Scale Pyrolysis of Used Tires

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Hierarchical Porous Structure Formation Mechanism in Food Waste Component Derived N-doped Biochar: Application in VOCs Removal.

Ultra-highly porous carbon from Wasted soybean residue with tailored porosity and doped structure as renewable multi-purpose absorbent for efficient CO2, toluene and water vapor capture