Abstract:The object of this study was to evaluate the monitoring of thermal ablation therapy by measuring the nonlinear response to ultrasound insonation at the region being treated. Previous reports have shown that during tissue heating, microbubbles are formed. Under the application of ultrasound, these microbubbles may be driven into nonlinear motion that produces acoustic emissions at sub-harmonic frequencies and a general increase of emissions at low frequencies. These low frequency emissions may be used to monitor ablation surgery. In this study, a modified commercial ultrasound system was used for transmitting ultrasound pulses and for recording raw RF-lines from a scan plane in porcine (in vitro) and rabbit (in vivo) livers during radio-frequency ablation (RFA). The transmission pulse was 15 cycles in length at 4 MHz (in vitro) and 3.6 MHz (in vivo). Thermocouples were used for monitoring temperatures during the RFA treatment.In the in vitro experiments, recorded RF signals (A-lines) were segmented, and the total energy was measured at two different frequency bands: at a low frequency band (LFB) of 1-2.5 MHz and at the transmission frequency band (TFB) of 3.5-4.5 MHz. The mean energy at the LFB and at the TFB increased substantially in areas adjacent to the RF needle. These energies also changed abruptly at higher temperatures, thus, producing great variance in the received energy. Mean energies in areas distant from RF needle showed little change and variation during treatment. It was also shown that a 3 dB increase of energy at the low frequency band was typically obtained in regions in which temperature was above 53.3 ± 5° C. Thus, this may help in evaluating regions undergoing hyperthermia. In the in vivo experiments, an imaging algorithm based on measuring the LFB energy was used. The algorithm performs a moving average of the LFB energies measured at segments within the scan plane.Results show that a colored region is formed on the image and that it is similar in size to a measurement of the lesion from gross pathology, with a correlation coefficient of 0.743.

Monitoring the Internal Temperature of Active Elements of High-Power Lasers Using Ultrasonic Probing

Laser-induced thermal damage detection in metallic materials via acoustic emission and ensemble empirical mode decomposition

Temperature Measurement System in High Power RF Current Environment

Laser ultrasonic inspection for mechanical properties of materials at high temperature

Remote temperature measurement of the exposed region in pulse laser assisted microprocessing

Indirect Temperature Measurement for Quasi-continuous-wavelength High Power Laser Diode Bars

Non-contact monitoring of the depth temperature profile for medical laser scanning technologies

Interstitial Optical Monitoring of Focal Laser Ablation

Identification and qualification of temperature signal for monitoring and control in laser cladding

Design and performance verification of thermal protection structure of high temperature probe in aeroengine

Research on key technology of ultrasonic temperature measuring instrument in high-temperature solid structure

Vibroacoustic Monitoring Features of Radiation-Beam Technologies by the Case Study of Laser, Electrical Discharge, and Electron-Beam Machining

Fabry–Perot interference temperature sensor integrated high-power-laser optical fiber probe for laser ablation

A novel laser-EMAT ultrasonic longitudinal wave resonance method for wall thickness measurement at high temperatures

Computer-Controlled Temperature Measurement System for the Small Exposed Region in Laser Assisted Microprocessing

The Use of Cooled Axial Conduction Guarded Probe for the Measurement of Transient Heat Flux by Calibrating the Unit Step Response

A microscale nanosecond time-resolved platinum thermometer probing Gaussian pulsed laser induced temperature

Monitoring radio-frequency thermal ablation with ultrasound by low frequency acoustic emissions--in vitro and in vivo study

Characteristics of High-Temperature Equipment Monitoring Using Dry-Coupled Ultrasonic Waveguide Transducers.

Non-invasive Treatment Efficacy Evaluation for High-Intensity Focused Ultrasound Therapy Using Magnetically Induced Magnetoacoustic Measurement

Measurement of Small-Signal and Large-Signal Responses of Packaged Laser Modules at High Temperature