Abstract:A simply fabricated, highly sensitive, and inexpensive optical fiber temperature sensor is reported with a Fabry–Perot (FP) microcavity of controlled length. The microcavity with controllable length is fabricated by single-mode fiber (SMF) and polydimethylsiloxane (PDMS) for temperature sensing. After the PDMS is cured, the SMF is connected to the supercontinuum light source (SCLS) and the optical spectrometer analyzer (OSA) for online observation of the reflection spectrum. The micro-displacement platform is used to pull the SMF to form an air cavity. After the air cavity is stabilized, ultraviolet (UV) activated glue is used for packaging outside the PDMS. The FP microcavity is formed by the end face of the SMF and the face of PDMS. The length of the FP microcavity can be controlled online by the micro-displacement platform to a minimum of 15 µm. The free spectral range (FSR) may reach 74.8 nm and the interference fringe contrast (IFC) is up to 19.8 dB to allow sensitive measurements across a wide temperature range. The experiments demonstrate a high temperature sensitivity of 5.388 nm/°C from 33 to 93 °C with high repeatability and linearity (R2=0.9937). Stability experiments showed that the maximum changes in wavelength and intensity are only 45 pm and 0.035 dB, respectively. It is anticipated that the easily constructed, compact, and inexpensive fiber-optic temperature sensor will be employed in practical applications.

Fabry–Perot interference temperature sensor integrated high-power-laser optical fiber probe for laser ablation

Refractive-index-modified-dot Fabry-Perot fiber probe fabricated by femtosecond laser for high-temperature sensing

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

1100 Degrees C Fiber-Optic High-Temperature Fabry-Perot Sensors Fabricated By Laser-Micromachining

Single microchannel high-temperature fiber sensor by femtosecond laser-induced water breakdown.

Compact highly sensitive Fabry-Perot temperature and gas pressure sensing probe fabricated by a femtosecond laser and PDMS

Femtosecond Laser Written Ultra-Weak Fabry-Perot Array for Distributed Absolute Temperature Profile Sensing with High Spatial Resolution.

Femtosecond Laser Microprinting of a Polymer Optical Fiber Interferometer for High-Sensitivity Temperature Measurement

Microfiber Fabry-Perot interferometer used as a temperature sensor and an optical modulator

Ultracompact optical fiber high‐temperature sensor based on the angled fiber end face

High Resolution Polymer/air Double-Cavity Fabry–Perot Fiber Temperature Sensor Based on Exposed Core Microstructured Fiber

Multipoint temperature measurement system composed of fiber-optic Fabry–Perot interference sensors and a wavelength-division multiplexing filter

High-Temperature Sensor Based on Fabry-Perot Interferometer in Microfiber Tip

Fabry–Perot optical fiber tip sensor for high temperature measurement

Miniature All-Fiber Fabry-Perot Interferometric High Temperature Sensor Based on a Thin Film

High temperature microstructured fiber sensor based on a partial-reflection-enabled intrinsic Fabry-Perot interferometer.

Fabry-Perot Interferometric High-Temperature Sensing Up To 1200 Degrees C Based On A Silica Glass Photonic Crystal Fiber

Laser-Machined Cascaded Micro Cavities for Simultaneous Measurement of Dual Parameters Under High Temperature

High-Pressure and High-Temperature Characteristics of A Fabry-Perot Interferometer Based on Photonic Crystal Fiber

Multimode fiber Fabry-Perot interferometer tip sensor

Preparation and Performance of a Fiber Optic Temperature Sensor with Multiple Fluorescence Mechanisms