Abstract:Temperature sensing is essential for human health monitoring. High-sensitivity (>1 nm/°C) fiber sensors always require long interference paths and temperature-sensitive materials, leading to a long sensor and thus slow response (6–14 s). To date, it is still challenging for a fiber optic temperature sensor to have an ultrafast (∼ms) response simultaneously with high sensitivity. Here, a side-polished single-mode/hollow/single-mode fiber (SP-SHSF) structure is proposed to meet the challenge by using the length-independent sensitivity of an anti-resonant reflecting optical waveguide mechanism. With a polydimethylsiloxane filled sub-nanoliter volume cavity in the SP-SHSF, the SP-SHSF exhibits a high temperature sensitivity of 4.223 nm/°C with a compact length of 1.6 mm, allowing an ultrafast response (16 ms) and fast recovery time (176 ms). The figure of merit (FOM), defined as the absolute ratio of sensitivity to response time, is proposed to assess the comprehensive performance of the sensor. The FOM of the proposed sensor reaches up to 263.94 (nm/°C)/s, which is more than two to three orders of magnitude higher than those of other temperature fiber optic sensors reported previously. Additionally, a three-month cycle test shows that the sensor is highly robust, with excellent reversibility and accuracy, allowing it to be incorporated with a wearable face mask for detecting temperature changes during human breathing. The high FOM and high stability of the proposed sensing fiber structure provide an excellent opportunity to develop both ultrafast and highly sensitive fiber optic sensors for wearable respiratory monitoring and contactless in vitro detection.

Preparation and Performance of a Fiber Optic Temperature Sensor with Multiple Fluorescence Mechanisms

A Temperature Sensor Based on Optical Microfiber Knot Resonator

Fiber temperature sensor based on rare earth fluorescence material

The Technique of Doped Optical Fiber Thermometer Based on Fluorescence Lifetime Measurement

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Application of Phase Locked Detection Technology in Fluorescence Fiber-optic Temperature Sensor

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Small and Practical Optical Fiber Fluorescence Temperature Sensor

A novel multicore fiber temperature sensor based on Fabry-Perot structure

High Resolution Polymer/air Double-Cavity Fabry–Perot Fiber Temperature Sensor Based on Exposed Core Microstructured Fiber

Ultrasensitive Temperature Sensor with Cascaded Fiber Optic Fabry–Perot Interferometers Based on Vernier Effect

Temperature sensor based on optical fiber Fabry-Pérot interferometer

High-Sensitivity Temperature Sensor Based on Fiber Fabry-Pérot Interferometer with UV Glue-Filled Hollow Capillary Fiber

Tip-Packaged High-Temperature Fiber-Optic Sensor Based on Parallel Fabry–Perot Interferometers and the Vernier Effect

Characterization of an optical fiber thermometer using Tm3+:YAG crystal, based on the fluorescence lifetime approach

Manipulable Multipurpose Nanothermometers Based on a Fluorescent Hybrid Glass Fiber Microsphere Cavity

A temperature sensor based on multi-beam capture and interference

Resonant fiber-optic thermometry with high resolution and wide range

Experimental Research on FLM Temperature Sensor with an Ethanol-Filled Photonic Crystal Fiber

Compact Fiber Biocompatible Temperature Sensor Based on a Hermetically-Sealed Liquid-Filling Structure

High-sensitivity and Fast-Response Fiber Optic Temperature Sensor Using an Anti-Resonant Reflecting Optical Waveguide Mechanism