Abstract:This paper reports the development of a sapphire (�� - Al 2O 3) single crystal optical fiber thermometer using two wavelength bands. A thin film of precious metal or ceramic deposited onto one end of the sapphire fiber forms a mini-radiation cavity. The other end of the sapphire fiber is coupled to a low-loss silica fiber. Radiation from the small cavity is transmitted along the silica fiber into a photodetection system which consists of a lens, beam splitter, two interference filters (820 nm and 940 nm center wavelength, 30 nm bandwidth) and two silicon photocells. The temperature measurement is based on the detection of radiation from the small cavity. The sapphire fiber (0.25 - 1.0 mm diameter, 100 - 450 mm length) was grown by the laser heated pedestal growth (LHPG) methods. Transmission loss in the sapphire fiber was experimentally measured. Theoretical analysis shows the apparent emittance of the small cavity with a length to diameter (L/D) ratio greater than eight is a constant value near to one, so the small cavity can be considered as a small black-body cavity. Using the developed sapphire fiber temperature sensor, we have built a sapphire fiber thermometer based on a 8098 single-chip microcomputer system. It was calibrated at some known stable temperature point and uses the fundamental radiation law to extrapolate to other temperatures. By taking the ratio of the optical power at two wavelengths, errors due to changes in the system, such as emissivity and transmission losses, can be canceled out. The thermometer has an operating temperature range of 800 to 1900 degrees Celsius, and an accuracy of 0.2% at 1000 degrees Celsius. There are a number of applications of the thermometer both in science and industry.

The Technique of Doped Optical Fiber Thermometer Based on Fluorescence Lifetime Measurement

Sapphire Fiber Thermometer Based on Fluorescence Lifetime Measurement

LED Pump Sapphire Optical Fiber Thermometer Based on Fluorescence Lifetime Measurement

Application of Phase Locked Detection Technology in Fluorescence Fiber-optic Temperature Sensor

Novel Sapphire Fiber Thermometer Using Fluorescent Decay

Sapphire-ruby single-crystal fibre for application in high temperature optical fibre thermometers: Studies at temperatures up to 1500 °C

A Device for Fluorescence Temperature Measurement Based on Fast Fourier Transform

A Sapphire Fiber Thermometer for High Temperature Measurement in Tundish Based on the Fast Fourier Transform

Multi-Doped Zirconia Ceramic Probe for Fiber-Optic Contact Measurement of Ultra-High Temperatures in Oxidative Atmosphere

Sapphire-Fiber Thermometer Ranging from 20 to 1800 °C

Sapphire Optic Fiber Thermometer for High Temperature in Tundish

Development of A Compact Sapphire Fiber Thermometer Probe Using Fluorescent Decay

Characterization of an optical fiber thermometer using Tm3+:YAG crystal, based on the fluorescence lifetime approach

Fiber temperature sensor based on rare earth fluorescence material

Fiber Thermometer Based on the Cross Detection of the Fluorescence Lifetime of Cr3+:YAG Crystal Fiber and Plank"s Blackbody Radiation from Cryogenic Up to 1400°C

Fiber Thermometer Based on the Cross Detection of the Fluorescence Decay of Tm:YAG Crystal Fiber and Background Radiation

Cr-doped sapphire fibre sensor for fluorescence thermometry

Study on the doped crystal fiber high-temperature sensor

Development Of A Sapphire Fiber Thermometer Using Two Wavelength Bands

Characteristics of Cr3+:YAG single crystal optical fiber for fluorescence temperature sensor

Growth and Characteristics of Cr3+:YAG Crystal Fiber for Fluorescence Decay Temperature Sensor