Abstract:The antiwear properties of tribofilms formed on steel surfaces lubricated with various multi-component lubricants were investigated at an elevated temperature and under load-speed conditions conducive to sliding in the boundary lubrication regime. The lubricants contained base oil, reduced-level (secondary) zinc dialkyl dithiophosphate (ZDDP), and nitrogenous dispersant. The wear resistance of the tribofilms produced from different oil blends was evaluated in the context of the rate of change in the sliding track volume (wear rate for material loss) and the load-bearing capacity, chemical composition, and thickness of the tribofilms. Surface profilometry and scanning electron microscopy were used to quantify the wear performance and detect the prevailing wear mechanisms, whereas X-ray photoelectron spectroscopy elucidated the chemical composition and thickness of the tribofilms. The oil blends without ZDDP did not produce tribofilms with adequate antiwear properties, whereas the oil blends containing ZDDP and dispersant generated tribofilms with antiwear characteristics comparable to those of tribofilms produced from blends with a higher ZDDP content. Although dispersants can suspend oil contaminants and preserve the cleanness of the sliding surfaces, it was found that they can also reduce the antiwear efficacy of ZDDP. This was attributed to an additive-dispersant antagonistic behavior for surface adsorption sites affecting tribofilm chemistry and mechanical properties. Among the blends containing a mixture of ZDDP and dispersant, the best antiwear properties were demonstrated by the tribofilm produced from the blend consisting of base oil, 0.05 wt% ZDDP, and a bis-succinimide dispersant treated with ethylene carbonate. The findings of this investigation demonstrate the potential of multi-component lubricants with reduced-content ZDDP and nitrogen-based dispersant to form effective antiwear tribofilms.

The anti-wear properties and tribofilm evolution of organically modified halloysite nanotubes

Investigation of tribological properties of hydrothermally synthesized halloysite composites with carbon, MoS 2 and CuO

Tribo-Induced Catalytically Active Oxide Surfaces Enabling the Formation of the Durable and High-Performance Carbon-Based Tribofilms

Tribo-induced Evolution of Nodular Supporting Structures Providing High-Performance Solid Lubricants in Carbon Nanotube Coated Films

Influence of multi-interfacial structure on mechanical and tribological properties of TiSiN/Ag multilayer coatings

Composite Lubricating Films with Silane Coupling Agent-Modified Carbon Nanotubes on a Silicon Substrate with Enhanced Wear-Resistant Properties

In-situ synthesizing carbon-based film by tribo-induced catalytic degradation of PAO for reducing friction and wear.

Atomic insights into the deformation mechanism of an amorphous wrapped nanolamellar heterostructure and its effect on self-lubrication

Self-lubricated nanoporous TiO 2 -TiN films fabricated on nanocrystalline layer of titanium with enhanced tribological properties

Influence of Tribofilm on Superlubricity of Highly-Hydrogenated Amorphous Carbon Films in Inert Gaseous Environments

Superlow Friction of Titanium/silicon Codoped Hydrogenated Amorphous Carbon Film in the Ambient Air

Tribocatalytically-activated formation of protective friction and wear reducing carbon coatings from alkane environment

Evolution of tribo-induced interfacial nanostructures governing superlubricity in a-C:H and a-C:H:Si films

The evolution mechanism of tribo-oxide layer during high temperature dry sliding wear for nickel-based superalloy

Wear Mechanisms, Composition and Thickness of Antiwear Tribofilms Formed from Multi-Component Lubricants

Tribological behavior of sulfonitrided tribofilm generated from non-corrosive dimercaptobenzothiadiazole-based additives as effective boundary lubrication layer

Effect of Particle Size and Ligand on the Tribological Properties of Amino Functionalized Hairy Silica Nanoparticles as an Additive to Polyalphaolefin

Effect of Multilayer Graphene and Fe2O3 Nanoparticles on Wear Behavior of TC11 Alloy

Tribological and Mechanochemical Properties of Nanoparticle-Filled Polytetrafluoroethylene Composites under Different Loads

In-situ tribo-induced formation of superb lubricious carbon-based tribofilms on the catalytical active MoN-Ag film surfaces

Superlow Wear Realizable Tribofilms from Lubricant Oil Containing Hydrothermally Synthesized Magnesium Silicate Hydroxide/Carbon Core-Shell Nanoplates.