Abstract:A micro opto-mechanical displacement sensor is here presented. It is constituted by a sensing element based on two overlapped micro-diffraction gratings (MDGs). They present a platinum layer (45 nm of thick) on a glass substrate, a period of 525 µm constituted by a width of 150 µm of platinum separated (71.4% duty cycle). The working principle is based on the modulation of light intensity induced by the relative displacement between the MDGs: when a laser light perpendicularly hits the MDGs, the intensity of the transmitted light is a periodic function of the relative displacement between the two MDGs. A fiber optic is used to transport the transmitted light to a photodetector in order to avoid concerns related to the alignment between the optical components. The sensor's output is the ratio between the light intensity measured by the photodetector during the displacement of the MDGs and largest light intensity values measured in the whole range of measurement, therefore, it is lower than 1. The proposed sensor allows to discriminate displacement lower than 10 µm, using a cost effective micro-fabrication process implemented by the technique of Lift-Off. It shows a good linear behaviour in two ranges covering about one half of the MDGs period. Within the linear ranges it shows high sensitivity (about 0.5%/µm) and good accuracy (lower than 4% in the whole range of calibration); furthermore, the results show that a design with a duty cycle of 50% overcomes the marked decrease of sensitivity in a range of measurement corresponding to a grating period.

Hybrid microlaser encoder

Microlaser based on a hybrid structure of a semiconductor nanowire and a silica microdisk cavity.

Toward On-Chip Unidirectional and Single-Mode Polymer Microlaser

Subnanometer Resolution Displacement Sensor Based on a Grating Interferometric Cavity with Intensity Compensation and Phase Modulation

Fabrication of Scale Gratings for Surface Encoders by Using Laser Interference Lithography with 405 Nm Laser Diodes

Design of a Three-Axis Surface Encoder with a Blue-Ray Laser Diode

High-resolution compact displacement sensor based on anisotropic feedback of microchip Nd: YAG lasers

Highly accurate, absolute optical encoder using a hybrid-positioning method.

Miniaturized Optical Encoder with Micro Structured Encoder Disc

Small-size, high-resolution angular displacement measurement technology based on an imaging detector

A Two-Degree-of-freedom Linear Encoder with a Mosaic Scale Grating

An Organic Microlaser Based On An Aggregation-Induced Emission Fluorophore For Tensile Strain Sensing Dagger

A Sub-Nanometric Three-Axis Surface Encoder With Short-Period Planar Gratings For Stage Motion Measurement

An ultracompact high-resolution displacement sensor based on self-interference effect of single optical nanograting

Two-probe Optical Encoder for Absolute Positioning of Precision Stages by Using an Improved Scale Grating

Fabrication of diffraction gratings for surface encoders by using a Lloyd's mirror interferometer with a 405 nm laser diode

198 Laser Interference Lithography of Gratings for a Surface Encoder

A micro opto-mechanical displacement sensor based on micro-diffraction gratings: design and characterization

A microchip laser feedback interferometer with nanometer resolution and increased measurement speed based on phase meter

Microchip Nd:YAG Dual-Frequency Laser Interferometer for Displacement Measurement.

Heterodyne Planar Grating Encoder with High Alignment Tolerance, Especially Insensitivity to Grating Tilts