Abstract:In this paper, how the phase modulation index’s drift affects an open-loop resonator fiber optic gyro’s (RFOG’s) performance is discussed. By using the ratio of the second to fourth harmonic (2nd/4th harmonic), a harmonic feedback technique is proposed to suppress this drift. It is found that the phase modulation index’s drift would lead to a significant measurement error, which increases with rotation rate. It is proven that there exists an approximately linear correlation between phase modulation index and 2nd/4th harmonic. Using this correlation, the 2nd/4th harmonic feedback technique is applied to the open-loop RFOG to stabilize the phase modulation index. Although the phase modulation index slightly deviates from its optimal value in the dynamic state with this technique, it is proven that the induced backscatter noise could be neglected. The test results indicate that the phase modulation index’s drift with this technique is reduced to about 22% of that without suppression technique, and the stabilities of gyro output signal are respectively improved by about 29% and 31% under 5deg/s and 10deg/s when this technique is used. It is concluded that the 2nd/4th harmonic feedback technique does work in suppressing the phase modulation index’s drift.

Enhance Robustness Performance of Resonator Fiber Optical Gyroscope System Using Internal Model Control

Influence of intensity noise on the resonant fiber optic gyroscope and restraining

Research on the Feedback Control Characteristics and Parameter Optimization of Closed-Loop Fiber Optic Gyroscope

Reduction of High-Frequency Laser Noise in Resonant Fiber Optic Gyroscope with a Phase-Modulated Feedback Loop

Optimization of Reciprocal Modulation Parameters in Resonant Fiber Optic Gyro

Open-loop Operation Experiments in a Resonator Fiber-Optic Gyro Using the Phase Modulation Spectroscopy Technique.

Precision Analysis of Frequency Lock-in Technique in Resonator Micro Optic Gyroscope

Constant-frequency Oscillation Control for Vibratory Micro-Machined Gyroscopes

An Open-Loop RFOG Based on 2nd/4th Harmonic Feedback Technique to Suppress Phase Modulation Index’s Drift

Frequency Locking Technique in Digital Closed-Loop Resonator Fiber Optic Gyro

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

MEMS gyroscopes parametric excitation control scheme with constant resonant frequency

Improving the Performance of Broadband Source-Driven Resonant Fiber-Optic Gyroscopes

Resonator Fiber Optic Gyroscope with an All Digitalized System

Optimization of the Resonant Frequency Servo Loop Technique in the Resonator Micro Optic Gyro

Evaluation and Measurement of the Lock-in Effect in Resonant Fiber Optic Gyroscopes

Optimization Of Frequency Stabilization Loop For Resonator Fiber Optic Gyro

Performance Improvement of a Resonant Fiber Optic Gyroscope with a Hybrid Photonic Crystal Fiber Ring Resonator.

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

Eliminating bias drift error in lock-in frequency for a resonant fiber optic gyro.

An Open-Loop Test of a Resonator Fiber Optic Gyro