Abstract:In this paper, how the phase modulation index’s drift affects an open-loop resonator fiber optic gyro’s (RFOG’s) performance is discussed. By using the ratio of the second to fourth harmonic (2nd/4th harmonic), a harmonic feedback technique is proposed to suppress this drift. It is found that the phase modulation index’s drift would lead to a significant measurement error, which increases with rotation rate. It is proven that there exists an approximately linear correlation between phase modulation index and 2nd/4th harmonic. Using this correlation, the 2nd/4th harmonic feedback technique is applied to the open-loop RFOG to stabilize the phase modulation index. Although the phase modulation index slightly deviates from its optimal value in the dynamic state with this technique, it is proven that the induced backscatter noise could be neglected. The test results indicate that the phase modulation index’s drift with this technique is reduced to about 22% of that without suppression technique, and the stabilities of gyro output signal are respectively improved by about 29% and 31% under 5deg/s and 10deg/s when this technique is used. It is concluded that the 2nd/4th harmonic feedback technique does work in suppressing the phase modulation index’s drift.

Optimization Of Frequency Stabilization Loop For Resonator Fiber Optic Gyro

Reduction of High-Frequency Laser Noise in Resonant Fiber Optic Gyroscope with a Phase-Modulated Feedback Loop

Full Investigation of the Resonant Frequency Servo Loop for Resonator Fiber-Optic Gyro.

Optimization of the Resonant Frequency Servo Loop Technique in the Resonator Micro Optic Gyro

Optimization of Reciprocal Modulation Parameters in Resonant Fiber Optic Gyro

Reduction of the Effect of the Overflow Reset in Resonant Frequency Servo Loop for Resonator Fiber Optic Gyro

Frequency Locking Technique in Digital Closed-Loop Resonator Fiber Optic Gyro

Analysis on Phase Modulation Spectroscopy of Resonator Fiber Optic Gyro

An Open-Loop RFOG Based on 2nd/4th Harmonic Feedback Technique to Suppress Phase Modulation Index’s Drift

High-Bandwidth Frequency Servo Loop for Resonant Micro Optic Gyroscope with a Reduced Sampling Rate Proportional-Derivative Controller

Precision Analysis of Frequency Lock-in Technique in Resonator Micro Optic Gyroscope

Optimization of the sinusoidal phase modulation technique in resonant fiber optic gyro

Improving Thermal Stability Of A Resonator Fiber Optic Gyro Employing A Polarizing Resonator

Improving Thermal Stability of a Resonant Fiber Optical Gyroscope Using Triple Closed Loops

Eliminating bias drift error in lock-in frequency for a resonant fiber optic gyro.

Resonator Fiber Optic Gyroscope with an All Digitalized System

Performance Improvement of a Resonant Fiber Optic Gyroscope with a Hybrid Photonic Crystal Fiber Ring Resonator.

Improving the Scale Factor Thermal Stability of Resonant Fiber-Optic Gyroscopes by Tracking the Half-Wave Voltage of the Phase Modulator

Reduction of polarization-fluctuation induced drift in resonator fiber optic gyro by a resonator integrating in-line polarizers.

Hybrid Single-Polarization Fiber Ring Resonator and Implications for Resonant Fiber Optic Gyro

Optimizing the Broadband Source-Driven Resonant Fiber-Optic Gyroscope