Abstract:In this study, we analyze the influence of the pore structure of an SBA-15 particle on the light emission from its inner adsorbed quantum dots (QDs) and outer light-emitting diode (LED) chips. It is found that the particle features of a high refractive index, comparable feature size of pore structure, and lower amount of QD adsorption help with QD light extraction, demonstrating a mechanism to suppress QD light propagating through pores and thus reducing the reabsorption loss. We consequently developed highly efficient QD white LEDs with wet-mixing QD/SBA-15 nanocomposite particles (NPs) by further optimizing the packaging methods and the introduced NP mass ratio. The LEDs demonstrated a record luminous efficacy (the ratio of luminous flux to electrical power) of 206.8 (entrusted test efficiency of 205.8 lm W<sup>–1</sup> certificated by China National Accreditation Service) and 137.6 lm W<sup>–1</sup> at 20 mA for white LEDs integrating only green QDs and green–red QD color convertors, respectively, with improved operating stability. These results are comparable to conventional phosphor-based white LEDs, which can be a starting point for white LEDs only using QDs as convertors toward commercialization in the near future.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c05735?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c05735</a>.TEM and SEM images, EDS data, diagrams of light-extraction mechanisms of QD light, absorbance, EL, and PL spectra, photographs of QD composites, optical microscopy image, radiant power and luminous flux data, QD energy proportion and concentration data, FDTD simulation, CNAS test results, CIE data (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c05735/suppl_file/nn0c05735_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Increasing Efficiency and Extending Lifetime of Red Micro Light-Emitting Diodes Through Sidewall Treatment for Improved Reliability

Improved Performance of AlGaInP Red Micro Light-Emitting Diodes by Sidewall Treatments of Citric Acid

Optical and microstructural characterization of Micro-LED with sidewall treatment

Anomalous Efficiency Elevation of Quantum-Dot Light-Emitting Diodes Induced by Operational Degradation.

Enhanced Light Extraction Efficiency by Self-Masking Technology with Carbonized Photoresist for Light-Emitting Diodes

P‐156: Efficiency Improvement Mechanism Analysis of Sidewall Passivation GaN based Micro‐LEDs by Atomic Layer Deposition

Water-induced high-performance quantum-dot light-emitting diodes

Shelf-stable quantum-dot light-emitting diodes with high operational performance

Advances in Understanding Quantum Dot Light-Emitting Diodes

Promoting Light Extraction Efficiency of Ultraviolet Light Emitting Diodes by Nanostructure Optimization

Efficiency boosting of 236 nm AlGaN-based micro-LEDs

Improving AlGaInP Micro-LEDs Characteristics via Varied Dielectric Passivation Layers

Increase in the efficiency of III-nitride micro LEDs by atomic layer deposition.

Improving the Electrical and Optical Characteristics of AlGaInP Red Micro-LEDs by Double Dielectric Passivation

High efficiency of III-nitride micro-light-emitting diodes by sidewall passivation using atomic layer deposition

Improving the Operational Lifetime of Metal-Halide Perovskite Light-Emitting Diodes with Dimension Control and Ligand Engineering

Toward 200 Lumens per Watt of Quantum-Dot White-Light-Emitting Diodes by Reducing Reabsorption Loss

Improved Optical and Electrical Characteristics of GaN-Based Micro-LEDs by Optimized Sidewall Passivation

Achieving Extreme Utilization of Excitons by an Efficient Sandwich-Type Emissive Layer Architecture for Reduced Efficiency Roll-Off and Improved Operational Stability in Organic Light-Emitting Diodes.

Optimizations of luminescent materials for white light emitting diodes toward healthy lighting

Improving AlGaN-based deep-ultraviolet light-emitting diodes: SiO2 passivation and size optimization for enhanced optoelectronic performance