Abstract:Micro-light emitting diodes (Micro-LEDs) based on III-nitride semiconductors have become a research hotspot in the field of high-resolution display due to its unique advantages. However, the edge effect caused by inductively coupled plasma (ICP) dry etching in Micro-LEDs become significant with respect to the decreased chip size, resulting in a great reduction in device performance. In this article, sector-shaped GaN-based blue Micro-LEDs are designed and fabricated. Additionally, the device performance of different size Micro-LEDs with passivation are investigated with respect to those without passivation. Several methods have been applied to minimize the etching damage near the edge, including acid-base wet etching and SiO2 passivation layer growth. The room temperature photoluminescence (PL) results demonstrate that the light emission intensity of Micro-LEDs can be significantly enhanced by optimized passivation process. PL mapping images show that the overall luminescence of properly passivated Micro-LEDs is enhanced, the uniformity is improved, and the effective luminescence area is increased. The recombination lifetime of carriers in Micro-LEDs are increased by the usage of passivation process, which proves the reduction in non-radiative recombination centers in Micro-LEDs and improved luminescence efficiency. As a result, the internal quantum efficiency (IQE) is improved from 14.9% to 37.6% for 10 μm Micro-LEDs, and from 18.3% to 26.9% for 5 μm Micro-LEDs.

Improving the Electrical and Optical Characteristics of AlGaInP Red Micro-LEDs by Double Dielectric Passivation

Improving AlGaInP Micro-LEDs Characteristics via Varied Dielectric Passivation Layers

Efficient Red Phosphorescence Polymer Light-Emitting Diodes with Dual Function Polymer

Improvement of Blue Llight-Ight-ight-eeemitting Mitting Ddiodes Iodes with an Undoped Graded Layer As the Electrons Tunneling Barrier Layer

Performance comparison of flip-chip blue-light microLEDs with various passivation

Improved electro-optical and photoelectric performance of GaN-based micro-LEDs with an atomic layer deposited AlN passivation layer.

Improved Performance of AlGaInP Red Micro Light-Emitting Diodes by Sidewall Treatments of Citric Acid

Performance Improvement of AlGaInP Based Red LEDs by Combination of Omnidirectional Mirror and AuZn Micro-contacts

Improved Optical and Electrical Characteristics of GaN-Based Micro-LEDs by Optimized Sidewall Passivation

High efficiency of III-nitride micro-light-emitting diodes by sidewall passivation using atomic layer deposition

Improving AlGaN-based deep-ultraviolet light-emitting diodes: SiO2 passivation and size optimization for enhanced optoelectronic performance

The impacts of SiO 2 atomic-layer-deposited passivation layer thickness on GaN-based green micro-LEDs

Investigations of Sidewall Passivation Technology on the Optical Performance for Smaller Size GaN-Based Micro-LEDs

Optimizing InGaN Micro-LED Efficiency: Investigating the Internal Quantum Efficiency and Ideality Factor Connection

Increasing Efficiency and Extending Lifetime of Red Micro Light-Emitting Diodes Through Sidewall Treatment for Improved Reliability

Efficiency boosting of 236 nm AlGaN-based micro-LEDs

Study of GaN-Based LEDs With Hybrid SiO2 Microsphere/Nanosphere AntiReflection Coating as a Passivation Layer by a Rapid Convection Deposition

Enhanced external quantum efficiencies of AlGaN-based deep-UV LEDs using reflective passivation layer

High-Efficiency Vertical-Chip Micro-Light-Emitting Diodes via p-GaN Optimization and Surface Passivation

High-efficiency InGaN red light-emitting diodes with external quantum efficiency of 10.5% using extended quantum well structure with AlGaN interlayers

Significant reduction in sidewall damage related external quantum efficiency (EQE) drop in red InGaN microLEDs (∼625 nm at 1 A cm−2) with device sizes down to 3 μm