Abstract:Experiments like ATLAS at the HL-LHC or detectors at future hadron colliders need muon detectors with excellent momentum resolution up to the TeV scale both at the trigger and offline reconstruction levels. This requires muon tracking chambers with high spatial resolution even at the highest background fluxes. Drift-tube chambers are the most cost-effective technology for large-area muon systems, providing the required high rate capability and three-dimensional spatial resolution. Thanks to advances in electronics, the new generation small-diameter Muon Drift Tube (sMDT) detectors with 15 mm tube diameter can be used in stand-alone mode up to the background rates expected at future hadron collider experiments, providing event times and second coordinates without additional trigger chambers. New developments in integrated front-end electronics include fast baseline restoration of the shaped signal and picosecond time-to-digital converters for second coordinate measurement with double-sided read-out. Self-triggered operation is now possible using modern high-performance FPGAs for real-time pattern recognition and track reconstruction. A new amplifier shaper discriminator chip in 65 nm TSMC CMOS technology with increased sensitivity and faster baseline recovery has been developed to cope with high background fluxes. Extensive test beam campaigns using sMDT chambers with new readout electronics have been performed at the CERN Gamma Irradiation Facility (GIF++). Results show that the shorter peaking time of the new chip enhances the spatial resolution of the drift tubes by up to 100 $\mu$m at a background rate of 1 MHz, the maximum rate expected at the 100 TeV collider experiment.

Development of high granulated straw chambers of large sizes

2-D straw detectors with high rate capability

Performance of small-diameter muon drift tube chambers with new fast readout ASIC at high background rates

The use of segmented cathode of a drift tube for designing a track detector with a high rate capability

Development of a Straw Tube Chamber with Pickup-Pad Readout

Development of 10 m Hodoscope Made of Drift Tubes for Cosmic Ray Muon Registration

Operating mode of high pressure straws with high spatial resolution

Development and property study of the $12 μ$m thick straw tubes with a diameter of 5 mm for the COMET Straw Tracker System

Studies of the effect of rate on gain for straw tube detector

New Drift Chambers for the ALPOM-2 Experiment

Longitudinal tension and mechanical stability of a pressurized straw tube

Using the cathode surface of straw tube for measuring the track coordinates along the wire

A Panel Prototype for the Mu2e Straw Tube Tracker at Fermilab

Development of scintillating fiber detector technology for high rate particle tracking

Construction and Test of New Precision Drift-Tube Chambers for Upgrades of the ATLAS Muon Spectrometer in 2016/17

Design of a Gas Monitoring Chamber for High Pressure Applications

Construction and Test of MDT Chambers for the ATLAS Muon Spectrometer

The Straw Tube Trackers of the PANDA Experiment

Realization and Test of Position Sensitive Boron Coated Straw-Tube

Construction of Precision sMDT Detector for ATLAS Muon Spectrometer Upgrade

Numerical Studies of Straw Tube Detectors