Abstract:In the CBM (Compressed Baryonic Matter) experiment constructed at the Facility for Anti-proton and Ion Research (Fair) at GSI, Darmstadt, Germany, MRPC(Multi-gap Resistive Plate Chamber) is adopted to construct the large TOF (Time-of-Flight) system to achieve an unprecedented precision of hadron identification, benefiting from its good time resolution, relatively high efficiency and low building price. We have developed a kind of double-ended readout strip MRPC. It uses low resistive glass to keep good performance of time resolution under high-rate condition. The differential double stack structure of 2x4 gas gaps help to reduce the required high voltage to half. There are 24 strips on one counter, and each is 270mm long, 7mm wide and the interval is 3mm. Ground is placed onto the MRPC electrode and feed through is carefully designed to match the 100 Ohm impedance of PADI electronics. The prototype of this strip MRPC has been tested with cosmic ray, a 98% efficiency and 60ps time resolution is gotten. In order to further examine the performance of the detector working under higher particle flux rate, the prototype has been tested in the 2014 October GSI beam time and 2015 February CERN beam time. In both beam times a relatively high rate of 1 kHz/cm2 was obtained. The calibration is done with CBM ROOT. A couple of corrections has been considered in the calibration and analysis process (including time-walk correction, gain correction, strip alignment correction and velocity correction) to access actual counter performances such as efficiency and time resolution. An efficiency of 97% and time resolution of 48ps are obtained. All these results show that the real-size prototype is fully capable of the requirement of the CBM-TOF, and new designs such as self-sealing are modified into the strip counter prototype to obtain even better performance.

Development of 10 m Hodoscope Made of Drift Tubes for Cosmic Ray Muon Registration

Scintillation Strip Detector of a Hybrid Hodoscope for Muon Tomography of Large-scale Objects

Performance of small-diameter muon drift tube chambers with new fast readout ASIC at high background rates

Production of Long-Strip Multi-Gap Resistive Plate Chamber Module for the Star-Mtd System

The Cosmic Ray Hodoscopes for Testing Thin Gap Chambers at the Technion and Tel Aviv University

R&D Mass Production of LMRPC Module for the STAR-MTD System

Construction and Test of MDT Chambers for the ATLAS Muon Spectrometer

Development of high granulated straw chambers of large sizes

Construction of Precision sMDT Detector for ATLAS Muon Spectrometer Upgrade

A Cosmic Ray Measurement Facility for ATLAS Muon Chambers

Construction and Test of New Precision Drift-Tube Chambers for Upgrades of the ATLAS Muon Spectrometer in 2016/17

A portable muon telescope for multidisciplinary applications

Development of Compact Muon Spectrometer Using Multiple Pressurized Gas Cherenkov Radiators

Exploring Advanced Detector Technologies for Muon Radiography Applications

Development and test of a real-size MRPC for CBM-TOF

R&D of a Real-Size Mosaic MRPC Within the Framework of the CMS Muon Upgrade

The use of segmented cathode of a drift tube for designing a track detector with a high rate capability

Performance of a New LMRPC Prototype for the STAR MTD System

Using Cosmic Ray Muons to Assess Geological Characteristics in the Subsurface

Design and commissioning of a 600 L Time Projection Chamber with Microbulk Micromegas

Development and property study of the $12 μ$m thick straw tubes with a diameter of 5 mm for the COMET Straw Tracker System