Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Deionization performance, desalination enhancement mechanism, desorption behavior and energy consumption analysis of biochar-based membrane capacitive deionization

Study on the Desalination and Regeneration Performance of PBA/AC Electrode Enhanced by MCDI

The regulation of biochar surface potential to achieve rapid capacitive deionization

Parameter Optimization Based on Capacitive Deionization for Highly Efficient Desalination of Domestic Wastewater Biotreated Effluent and the Fouled Electrode Regeneration

Electrosorptive Desalination by Carbon Nanotubes and Nanofibres Electrodes and Ion-Exchange Membranes

Hierarchical Porous Carbons Derived from Porous Biomass for High-Performance Capacitive Deionization

Enhancing Capacitive Deionization for Water Desalination: The Role of Activated Carbon in Contaminant Removal

Coupling ion-exchangers with inexpensive activated carbon fiber electrodes to enhance the performance of capacitive deionization cells for domestic wastewater desalination.

Desalination performance in versatile capacitive/battery deionization configurations using a cation intercalating electrode

Hierarchically porous biochar derived from aerobic granular sludge for high-performance membrane capacitive deionization

Mechanism of ball milled activated carbon in improving the desalination performance of flow- and fixed-electrode in capacitive deionization desalination

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Progress toward adsorption mechanism exploration method for capacitive deionization: Experimental, mathematical model, computational chemistry and machine learning

Anion-kinetics-selective Graphene Anode and Cation-Energy-selective MXene Cathode for High-Performance Capacitive Deionization

Multiscale MXene Engineering for Enhanced Capacitive Deionization via Adaptive Surface Charge Tailoring

Electrocapacitive Deionization: Mechanisms, Electrodes, and Cell Designs

Unleashing the power of capacitive deionization: Advancing ion removal with biomass-derived porous carbonaceous electrodes

Electrochemical capacitive desalination behavior of activated carbon fibers

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

Enhanced capacitive deionization of toxic metal ions using nanoporous walnut shell-derived carbon

Optimization of constant-current operation in membrane capacitive deionization (MCDI) using variable discharging operations