Abstract:Cathodic oxygen reduction, as a Faradaic side reaction, has been proven to be thermodynamically favorable for H 2 O 2 generation in capacitive deionization (CDI), which may provide a greener manner for organics control alongside desalination. However, the low levels of dissolved oxygen (DO) in saline water and its potential Faradaic degradation of carbon-based electrodes limit the H 2 O 2 generation in the conventional CDI (C-CDI). Herein, a novel three-phase CDI architecture (T-CDI) was proposed to simultaneously achieve stable desalination and supplementary H 2 O 2 generation. Unlike C-CDI architecture, T-CDI was open-ended at the cathode side, where porous nickel foam was used as current collector and air diffusion layer. Accordingly, a stable gas–liquid-solid three-phase interface was created inside the cathode, thus enhancing the diffusion and utilization of atmospheric air and preventing the damaging effects of excessive DO on the electrode. A stable electrosorption and electrocatalysis performance for T-CDI was obtained by regulating electrode hydrophilic-hydrophobic properties, comparing with other CDI configurations, and altering operating conditions. The salt adsorption capacity and H 2 O 2 accumulative concentration were 14.91 mg/g and 25.55 mg/L, respectively. Furthermore, the simultaneous desalination and organics control in T-CDI were investigated with the assistance of UV irradiation (T-CDI/UV). When treating NaCl and sulfamethazine (SMR) mixture solution, T-CDI/UV significantly reduced the irreversible electrode organic fouling and improved the desalination stability. Additionally, the potentially hazardous SMR was effectively removed alongside desalination. Finally, the long-term operation of T-CDI demonstrated that the generated H 2 O 2 cannot induce an additional substantial deterioration in desalination stability. The techno-economic assessment showed T-CDI was economically competitive compared with C-CDI. This study provides insights into the synergy of non-Faradaic and Faradaic processes and further diversifies the application of CDI in water treatment.

Desalination performance in versatile capacitive/battery deionization configurations using a cation intercalating electrode

Desalination Performance of a Unique Capacitive Deionization Cell Optimized with ANSYS Flow Simulation

Electrocapacitive Deionization: Mechanisms, Electrodes, and Cell Designs

Battery Electrode Materials with Omnivalent Cation Storage for Fast and Charge-Efficient Ion Removal of Asymmetric Capacitive Deionization

Innovative pilot plant capacitive deionization for desalination brackish water

Docked ions: Vertical-aligned tubular arrays for highly efficient capacitive deionization

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Enhanced brackish water desalination in capacitive deionization with composite Zn-BTC MOF-incorporated electrodes

Capacitive deionization for water desalination: Cost analysis, recent advances, and process optimization

Coupling ion-exchangers with inexpensive activated carbon fiber electrodes to enhance the performance of capacitive deionization cells for domestic wastewater desalination.

Constructing ionic highway in capacitive deionization via integrated electrodes based on bifunctional ionomer

Strong Interface Coupling Boosting Hierarchical Bismuth Embedded Carbon Hybrid for High-Performance Capacitive Deionization

Integrating battery and capacitive materials for efficient sodium and chloride capture

Efficient dual-ions hybrid capacitive system for superior deionization with enhanced kinetics match

Anion-kinetics-selective Graphene Anode and Cation-Energy-selective MXene Cathode for High-Performance Capacitive Deionization

Synergistic effect of intercalation and EDLC electrosorption of 2D/3D interconnected architectures to boost capacitive deionization for water desalination via MoSe2/mesoporous carbon hollow spheres

Preparation and Application of Electrodes in Capacitive Deionization (CDI): a State-of-Art Review

Reducing Ohmic Resistances in Membrane Capacitive Deionization Using Micropatterned Ion-exchange Membranes, Ionomer Infiltrated Electrodes and Ionomer Coated Nylon Meshes

Deionization performance, desalination enhancement mechanism, desorption behavior and energy consumption analysis of biochar-based membrane capacitive deionization

Tuning Capacitive Deionization Mechanisms by Changing Electrodes’ Properties and Charging Profile in a Multiscale Simulation Study

Supplementary H 2 O 2 generation in capacitive deionization with a three-phase architecture and its application in simultaneous desalination and organics control