Abstract:Flow electrode capacitive deionization (FCDI) is a highly promising desalination technique known for its exceptional electrosorption capacity, making it suitable for efficient salt separation in high salinity water. However, the unsatisfactory charge transfer process between the flow electrode and current collector severely curtails the salt separation and enrichment performance of the FCDI device. To address this issue, three-dimensional titanium mesh (3D-TM) was proposed as a novel current collector for FCDI device, which significantly amplifies the charge transfer area and exhibits excellent salt separation performance. The 3D-TM current collector promotes the electron transfer, charge percolation, and ion migration processes through the electroconvection generated by the turbulence effect on the flow electrode. In the specific case of the 20-mesh 3D-TM, which is composed of 12 stacking layers of titanium mesh, the remarkable average salt removal rate and charge efficiency were achieved 5.06 μmol cm −2 min −1 and 92.9 % under an appropriate applied voltage of 2.0 V, respectively. Dramatically, the desalination performance maintained above 76.4 % over 100 desalination cycles at 2.0 V, demonstrating the exceptional cyclic stability of the 3D-TM FCDI cell. In the seawater desalination, the 3D-TM FCDI cell exhibited an impressive salt removal efficiency of 97.5 % (from 34.2 g L − 1 to 0.84 g L − 1 ) for 1 L East China seawater at 2.0 V for 24 h. For lithium-ion enrichment, the FCDI continuous desalting system achieved an astonishing concentration of 17.3 g L − 1 for Li + ions enrichment from an initial concentration of 1.30 g L − 1 , obtaining the average salt treating rate of 23.6 g m − 2 h − 1 and charge efficiency of 80.0 %. Moreover, the lithium-sodium ions and lithium-magnesium ions enrichments were both conducted, yielding an enriched concentration of 10.4 g L − 1 and 7.30 g L − 1 for Li + ions, respectively. These findings highlight the enormous potential of FCDI technology in industrial engineering applications, further establishing it as a highly viable solution.

Supplementary H 2 O 2 generation in capacitive deionization with a three-phase architecture and its application in simultaneous desalination and organics control

Efficient dual-ions hybrid capacitive system for superior deionization with enhanced kinetics match

Docked ions: Vertical-aligned tubular arrays for highly efficient capacitive deionization

Parameter Optimization Based on Capacitive Deionization for Highly Efficient Desalination of Domestic Wastewater Biotreated Effluent and the Fouled Electrode Regeneration

Desalination performance in versatile capacitive/battery deionization configurations using a cation intercalating electrode

A novel two-stage continuous capacitive deionization system with connected flow electrode and freestanding electrode

Up-shifting the desalination rate limit of capacitive deionization via integrating chloride-capturing Bi nanocluster with flow-through cell architecture

Capacitive deionization coupled with microbial fuel cells to desalinate low-concentration salt water.

Efficient and Durable Sodium, Chloride‐doped Iron Oxide‐Hydroxide Nanohybrid‐Promoted Capacitive Deionization of Saline Water via Synergetic Pseudocapacitive Process

Optimization of Desalination Efficiency and Exploratory Applications of TiO 2 Active Site Electrode Enhanced by Activated Carbon and Tween 80 in Capacitive Deionization Technology

Enhancing Capacitive Deionization for Water Desalination: The Role of Activated Carbon in Contaminant Removal

Electrocapacitive Deionization: Mechanisms, Electrodes, and Cell Designs

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Engineering strategies toward electrodes stabilization in capacitive deionization

Enhancement of Salt Removal in Capacitive Deionization Cell Through Periodically Alternated Oxidation of Electrodes

Flexible construction of three-dimensional continuous conductive structure by hollow carbon sphere and CNT for promoted ions transport in flow-electrode capacitive deionization

Tuning Capacitive Deionization Mechanisms by Changing Electrodes’ Properties and Charging Profile in a Multiscale Simulation Study

Capacitive deionization for water desalination: Cost analysis, recent advances, and process optimization

Battery Electrode Materials with Omnivalent Cation Storage for Fast and Charge-Efficient Ion Removal of Asymmetric Capacitive Deionization

Recent Advances in Capacitive Deionization: Research Progress and Application Prospects

Three-dimensional titanium mesh-based flow electrode capacitive deionization for salt separation and enrichment in high salinity water