Abstract:Cathodic oxygen reduction, as a Faradaic side reaction, has been proven to be thermodynamically favorable for H 2 O 2 generation in capacitive deionization (CDI), which may provide a greener manner for organics control alongside desalination. However, the low levels of dissolved oxygen (DO) in saline water and its potential Faradaic degradation of carbon-based electrodes limit the H 2 O 2 generation in the conventional CDI (C-CDI). Herein, a novel three-phase CDI architecture (T-CDI) was proposed to simultaneously achieve stable desalination and supplementary H 2 O 2 generation. Unlike C-CDI architecture, T-CDI was open-ended at the cathode side, where porous nickel foam was used as current collector and air diffusion layer. Accordingly, a stable gas–liquid-solid three-phase interface was created inside the cathode, thus enhancing the diffusion and utilization of atmospheric air and preventing the damaging effects of excessive DO on the electrode. A stable electrosorption and electrocatalysis performance for T-CDI was obtained by regulating electrode hydrophilic-hydrophobic properties, comparing with other CDI configurations, and altering operating conditions. The salt adsorption capacity and H 2 O 2 accumulative concentration were 14.91 mg/g and 25.55 mg/L, respectively. Furthermore, the simultaneous desalination and organics control in T-CDI were investigated with the assistance of UV irradiation (T-CDI/UV). When treating NaCl and sulfamethazine (SMR) mixture solution, T-CDI/UV significantly reduced the irreversible electrode organic fouling and improved the desalination stability. Additionally, the potentially hazardous SMR was effectively removed alongside desalination. Finally, the long-term operation of T-CDI demonstrated that the generated H 2 O 2 cannot induce an additional substantial deterioration in desalination stability. The techno-economic assessment showed T-CDI was economically competitive compared with C-CDI. This study provides insights into the synergy of non-Faradaic and Faradaic processes and further diversifies the application of CDI in water treatment.

Optimization of Desalination Efficiency and Exploratory Applications of TiO 2 Active Site Electrode Enhanced by Activated Carbon and Tween 80 in Capacitive Deionization Technology

Polyethylene glycol-polyvinylidene fluoride/TiO2 nanocomposite polymer coatings with efficient antifouling strategies: Hydrophilized defensive surface and stable capacitive deionization

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

Parameter Optimization Based on Capacitive Deionization for Highly Efficient Desalination of Domestic Wastewater Biotreated Effluent and the Fouled Electrode Regeneration

Tuning Capacitive Deionization Mechanisms by Changing Electrodes’ Properties and Charging Profile in a Multiscale Simulation Study

Docked ions: Vertical-aligned tubular arrays for highly efficient capacitive deionization

Enhancing capacitive deionization performance of electrospun activated carbon nanofibers by coupling with carbon nanotubes

High speed capacitive deionization system with flow-through electrodes

Enhancing Capacitive Deionization for Water Desalination: The Role of Activated Carbon in Contaminant Removal

Supplementary H 2 O 2 generation in capacitive deionization with a three-phase architecture and its application in simultaneous desalination and organics control

Enhanced capacitive deionization of toxic metal ions using nanoporous walnut shell-derived carbon

Enhancement of Salt Removal in Capacitive Deionization Cell Through Periodically Alternated Oxidation of Electrodes

Multiscale MXene Engineering for Enhanced Capacitive Deionization via Adaptive Surface Charge Tailoring

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Two-Dimensional Hetero-structured TiO 2 /TiS 2 Nanosheets for Capacitive Deionization

Preparation and Application of Electrodes in Capacitive Deionization (CDI): a State-of-Art Review

Engineering strategies toward electrodes stabilization in capacitive deionization

Walnut shell-derived porous carbon with MgSO 4 modification for high-performance capacitive deionization

Enhancing the Desalination Performance of Capacitive Deionization Using a Layered Double Hydroxide Coated Activated Carbon Electrode

Recent Advances in Capacitive Deionization: Research Progress and Application Prospects