Abstract:Capacitive deionization (CDI) is an effective method for desalination of brackish water to alleviate the global freshwater crisis. Obtaining high desalination capacity is the primary focus of this field. Based on capacitive and pseudocapacitive behavior of the electrodes, current research is mainly devoted to increasing the specific surface area of electrode materials, however, the NaCl adsorption capacity is typically limited to the range of 10–20 mg g−1. In this work, we propose a new design paradigm of using a vertical-aligned nanotubular structure for CDI. This design allows ions to be temporarily held inside the electrodes like ships docked in a harbor (ion-docking effect, IDE) due to the greatly diminished water flow inside the tubes, thus enhancing the desalination capacity. As a result, the obtained CDI device based on vertical-aligned nanotubular P-TiO2 arrays shows an ultra-high NaCl adsorption capacity of ~60 mg g−1 within 30 min in 0.01 mol L−1 NaCl solution under 1.2 V, corresponding to a rapid average adsorption rate of 2 mg g−1 min−1. Moreover, the adsorption capacity could be further increased up to 121 and 136 mg g−1 under 1.2 and 1.5 V for 2.5 h adsorption, respectively, but still far from its equilibrium value. Finally, experiments and theoretical simulations are combined to further understand the IDE in CDI. This work highlights the discovery and the utilization of IDE in CDI, and provides new guidance for the design of CDI electrodes and can facilitate the development of CDI technology.

Enhanced capacitive deionization of toxic metal ions using nanoporous walnut shell-derived carbon

Unleashing the power of capacitive deionization: Advancing ion removal with biomass-derived porous carbonaceous electrodes

Walnut shell-derived porous carbon with MgSO 4 modification for high-performance capacitive deionization

Controlled synthesis of ZnO modified N-doped porous carbon nanofiber membrane for highly efficient removal of heavy metal ions by capacitive deionization

Metal cobalt dot-doped carbon structures with specific exposure surfaces for high-performance capacitive deionization

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

Boosted brackish water desalination and water softening by facilely designed MnO2/hierarchical porous carbon as capacitive deionization electrode

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Nanoarchitectonics of heteroatom-doped hierarchical porous carbon derived from carboxymethyl cellulose carbon aerogel and metal-organic framework for capacitive deionization

Mesopore-enhanced graphene electrodes with modified hydrophilicity for ultrahigh capacitive deionization

Three-dimensional electrode design with conductive fibers and ordered macropores for enhanced capacitive deionization performance

Capacitive deionization of NaCl solution with hierarchical porous carbon materials derived from Mg-MOFs

Docked ions: Vertical-aligned tubular arrays for highly efficient capacitive deionization

Enhancing Capacitive Deionization for Water Desalination: The Role of Activated Carbon in Contaminant Removal

Enhancing the Desalination Performance of Capacitive Deionization Using a Layered Double Hydroxide Coated Activated Carbon Electrode

ZnO site-occupying effect assisted regulation of nanoporous carbon network to enhance capacitive deionization for copper ions removal

Porous carbon materials derived from biomass waste as efficient electrodes for capacitive deionization desalination

Mesopore dominated capacitive deionization of N-doped hierarchically porous carbon for water purification

Efficient Capacitive Deionization Using Natural Basswood-Derived, Freestanding, Hierarchically Porous Carbon Electrodes

Efficient capacitive deionization with 2D/3D heterostructured carbon electrode derived from chitosan and g-C3N4 nanosheets