Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Porous carbon materials derived from biomass waste as efficient electrodes for capacitive deionization desalination

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

Pine-derived porous carbon for efficient capacitive deionization and the role of its hierarchical pore structure

Biobased polyporphyrin derived porous carbon electrodes for highly efficient capacitive deionization

Highly efficient water desalination by capacitive deionization on biomass-derived porous carbon nanoflakes

Walnut shell-derived porous carbon with MgSO 4 modification for high-performance capacitive deionization

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Hierarchical Porous Carbons Derived from Porous Biomass for High-Performance Capacitive Deionization

Ion-doped polypyrrole coupled core-shell hierarchical porous carbon electrode material with high desalination capacity for capacitive deionization

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Efficient capacitive deionization with 2D/3D heterostructured carbon electrode derived from chitosan and g-C3N4 nanosheets

Electrochemical capacitive desalination behavior of activated carbon fibers

Enhanced capacitive deionization of toxic metal ions using nanoporous walnut shell-derived carbon

Carbon Materials for Water Desalination by Capacitive Deionization

Unleashing the power of capacitive deionization: Advancing ion removal with biomass-derived porous carbonaceous electrodes

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Mesopore dominated capacitive deionization of N-doped hierarchically porous carbon for water purification

MnO 2 -modified soybean root derived porous carbon with excellent capacity deionization

Recent advanced freestanding pseudocapacitive electrodes for efficient capacitive deionization

Three-dimensional electrode design with conductive fibers and ordered macropores for enhanced capacitive deionization performance