Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Electrochemical capacitive desalination behavior of activated carbon fibers

Relation Between the Charge Efficiency of Activated Carbon Fiber and Its Desalination Performance

Linking macroscopic surface morphology of activated carbon fibres and electrosorption performance: An electrochemical impedance spectroscopy and capacitive deionization study

Asymmetric Electrodes Constructed with PAN-Based Activated Carbon Fiber in Capacitive Deionization

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

Capacitative deionization using commercial activated carbon fiber decorated with polyaniline.

Enhancing capacitive deionization performance of electrospun activated carbon nanofibers by coupling with carbon nanotubes

Effects of pore structure on the high-performance capacitive deionization using chemically activated carbon nanofibers

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Importance of the conductivity and specific surface area of electrode particles to the desalination performance and energy efficiency of flow-electrode capacitive deionization

Unleashing the power of capacitive deionization: Advancing ion removal with biomass-derived porous carbonaceous electrodes

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Highly efficient capacitive desalination for brackish water using super activated carbon with ultra-high pore volume

Porous carbon materials derived from biomass waste as efficient electrodes for capacitive deionization desalination

Enhancing the Desalination Performance of Capacitive Deionization Using a Layered Double Hydroxide Coated Activated Carbon Electrode

Preparation and Application of Electrodes in Capacitive Deionization (CDI): a State-of-Art Review

Enhancing Capacitive Deionization for Water Desalination: The Role of Activated Carbon in Contaminant Removal

Three-dimensional electrode design with conductive fibers and ordered macropores for enhanced capacitive deionization performance

Use of steam to prepare super active carbon with large pore volume for efficient capacitive deionization

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization