Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Linking macroscopic surface morphology of activated carbon fibres and electrosorption performance: An electrochemical impedance spectroscopy and capacitive deionization study

Electrochemical capacitive desalination behavior of activated carbon fibers

Relation Between the Charge Efficiency of Activated Carbon Fiber and Its Desalination Performance

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

Enhancing capacitive deionization performance of electrospun activated carbon nanofibers by coupling with carbon nanotubes

Performance of flow-through mode capacitive deionization device with activated carbon felt electrode

Selection and optimization of carbon-based electrode materials for flow-electrode capacitive deionization

Importance of the conductivity and specific surface area of electrode particles to the desalination performance and energy efficiency of flow-electrode capacitive deionization

Capacitative deionization using commercial activated carbon fiber decorated with polyaniline.

Effects of pore structure on the high-performance capacitive deionization using chemically activated carbon nanofibers

Using Activated Carbon Fiber Separators to Enhance the Desalination Rate of Membrane Capacitive Deionization

Asymmetric Electrodes Constructed with PAN-Based Activated Carbon Fiber in Capacitive Deionization

Acid-free treatment of fiber-structured biocarbon material enhances flow capacitive deionization performance

Capacitive deionization using carbon derived from an array of zeolitic-imidazolate frameworks

Cross-stacked super-aligned carbon nanotube/activated carbon composite electrodes for efficient water purification via capacitive deionization enhanced ultrafiltration

Metal-organic framework derived carbon nanoarchitectures for highly efficient flow-electrode CDI desalination

Sulfur & Nitrogen Co-Doped Electrospun Carbon Nanofibers As Freestanding Electrodes for Membrane Capacitive Deionization

Amino acids functionalized vascular-like carbon fibers for efficient capacitive deionization

Biochar with inherited negative surface charges derived from Enteromorpha prolifera as a promising cathode material for capacitive deionization technology

Enhanced desalination performances by using porous polyaniline-activated carbon composite flow-electrodes in capacitive deionization system

Small particle size activated carbon enhanced flow electrode capacitive deionization desalination performances by reducing the interfacial concentration difference