Abstract:Fluoride (F−) pollution in groundwater is an important environmental issue and capacitive deionization (CDI) holds promise for defluorination at moderate concentrations (e.g., 200−1,000mgL−1). However, existing electrodes suffer from the overlap of electrical-double-layer (EDL) and severe co-ion effects at low (e.g., <200mgL−1) and high sodium fluoride (NaF) concentrations (e.g., >1,000mgL−1), respectively, exhibiting poor salt adsorption capacity (SAC). Hence, a three-layer structured electrode, “membrane/carbon nanotube (CNT)/activated carbon (AC)” (CNT-MCE), was prepared through electrospinning CNT onto AC, followed by a polymer membrane coating. Compared to AC and membrane coated electrode, CNT-MCE with mesopore-dominated structure prevented EDL overlap, achieving a higher SAC of 40.8mgg−1 at 100mgL−1 NaF. At 1,500mgL−1 NaF, the positively charged CNT-MCE exhibited an improved SAC of 58.8mgg−1 by inhibiting co-ion effects. Meanwhile, CNT-MCE consistently demonstrated superb SACs at 200−800mgL−1 NaF and maintained excellent stability over a wide concentration gradient by inhibiting severe oxidation. Notably, CNT-MCE successfully decreased the F− concentration in simulated groundwater from 3.4 to 1.1mgL−1. Overall, our work provides an efficient strategy of electrode design to broaden the applicability of CDI for groundwater defluorination over a wide concentration gradient. Environmental Implication Exposing to groundwater with excessive fluoride will lead to serious damage on the ecosystem and human health. A novel three-layer structured electrode was prepared and used as anode in capacitive deionization for efficient fluoride removal from groundwater. With mesopore-dominated structure, positively charged surface and good conductivity, the prepared electrode could promote the formation of electrical double layer in the solution with low concentration of fluoride and inhibit co-ion repulsion effect in the solution with high concentration of fluoride, which exhibited the superb defluorination capacities over wide concentration gradients. Additionally, the prepared electrode showed outstanding defluorination stability by inhibiting serious oxidation.

Cross-stacked super-aligned carbon nanotube/activated carbon composite electrodes for efficient water purification via capacitive deionization enhanced ultrafiltration

Enhancing capacitive deionization performance of electrospun activated carbon nanofibers by coupling with carbon nanotubes

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

Enhanced Capacitive Deionization Properties of Activated Carbon Doped with Carbon Nanotube-Bridged Molybdenum Disulfide

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

A two-pronged strategy to boost the capacitive deionization performance of nitrogen-doped porous carbon nanofiber membranes

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

In-Situ Combined Dual-Layer Composite Filtration Electrodes for Wastewater Reclamation

Electrosorptive Desalination by Carbon Nanotubes and Nanofibres Electrodes and Ion-Exchange Membranes

Efficient groundwater defluorination over a wide concentration gradient through capacitive deionization with a three-layer structured membrane coating electrode

Selection and optimization of carbon-based electrode materials for flow-electrode capacitive deionization

Carbon electrode with cross-linked and charged chitosan binder for enhanced capacitive deionization performance

Capacitive deionization of NaCl solutions using carbon nanotube sponge electrodes

Enhanced Charge Efficiency and Electrode Separation Utilizing Magnetic Carbon in Flow Electrode Capacitive Deionization

Sulfonated GO coated carbon electrodes with cation-selective functions for enhanced capacitive deionization of saltwater

Enhanced Desalination Performance of Capacitive Deionization Using Nanoporous Carbon Derived from ZIF-67 Metal Organic Frameworks and CNTs

Hierarchical Co3O4/CNT decorated electrospun hollow nanofiber for efficient hybrid capacitive deionization

High speed capacitive deionization system with flow-through electrodes

Small particle size activated carbon enhanced flow electrode capacitive deionization desalination performances by reducing the interfacial concentration difference

Multiscale MXene Engineering for Enhanced Capacitive Deionization via Adaptive Surface Charge Tailoring

Efficient capacitive deionization with 2D/3D heterostructured carbon electrode derived from chitosan and g-C3N4 nanosheets