Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Performance of flow-through mode capacitive deionization device with activated carbon felt electrode

Small particle size activated carbon enhanced flow electrode capacitive deionization desalination performances by reducing the interfacial concentration difference

Importance of the conductivity and specific surface area of electrode particles to the desalination performance and energy efficiency of flow-electrode capacitive deionization

Coupling ion-exchangers with inexpensive activated carbon fiber electrodes to enhance the performance of capacitive deionization cells for domestic wastewater desalination.

Electrochemical capacitive desalination behavior of activated carbon fibers

Carbon felt (CF) acted as an "ionic capacitor" to enhance flow electrode capacitive deionization (FCDI) desalination performance

Enhanced Charge Efficiency and Electrode Separation Utilizing Magnetic Carbon in Flow Electrode Capacitive Deionization

Acid-free treatment of fiber-structured biocarbon material enhances flow capacitive deionization performance

Enhanced desalination performances by using porous polyaniline-activated carbon composite flow-electrodes in capacitive deionization system

Towards long-term operation of flow-electrode capacitive deionization (FCDI): Optimization of operating parameters and regeneration of flow-electrode

Selection and optimization of carbon-based electrode materials for flow-electrode capacitive deionization

Mechanism of ball milled activated carbon in improving the desalination performance of flow- and fixed-electrode in capacitive deionization desalination

Relation Between the Charge Efficiency of Activated Carbon Fiber and Its Desalination Performance

Enhancing Capacitive Deionization for Water Desalination: The Role of Activated Carbon in Contaminant Removal

Optimized desalination performance of high voltage flow-electrode capacitive deionization by adding carbon black in flow-electrode

High speed capacitive deionization system with flow-through electrodes

Enhancing the Total Salt Adsorption Capacity and Monovalent Ion Selectivity in Capacitive Deionization Using a Dual-Layer Membrane Coating Electrode

Linking macroscopic surface morphology of activated carbon fibres and electrosorption performance: An electrochemical impedance spectroscopy and capacitive deionization study

Improved desalination performance of flow-electrode capacitive deionisation by a novel drop-shape channel

Parameter Optimization Based on Capacitive Deionization for Highly Efficient Desalination of Domestic Wastewater Biotreated Effluent and the Fouled Electrode Regeneration

Carbon Materials for Water Desalination by Capacitive Deionization