Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Carbon Materials for Water Desalination by Capacitive Deionization

Preparation and Application of Electrodes in Capacitive Deionization (CDI): a State-of-Art Review

Electrocapacitive Deionization: Mechanisms, Electrodes, and Cell Designs

Recent progress in graphene-based and ion-intercalation electrode materials for capacitive deionization

Enhancing Capacitive Deionization for Water Desalination: The Role of Activated Carbon in Contaminant Removal

Exploration of Energy Storage Materials for Water Desalination via Next-Generation Capacitive Deionization

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Porous carbon materials derived from biomass waste as efficient electrodes for capacitive deionization desalination

Research progress of sodium super ionic conductor electrode materials for capacitive deionization

Review on carbon-based electrode materials for application in capacitive deionization process

Fluidized bed electrodes with high carbon loading for water desalination by capacitive deionization

Capacitive deionization for water desalination: Cost analysis, recent advances, and process optimization

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

A review of metal-organic framework-derived carbon electrode materials for capacitive deionization

Electrochemical capacitive desalination behavior of activated carbon fibers

Research progress on the application of carbon-based composites in capacitive deionization technology

Research Progress of Carbon Materials Derived from the Zn-Based Metal-Organic Frameworks in Capacitive Deionization

Recent Advances in Faradic Electrochemical Deionization: System Architectures versus Electrode Materials

Selection and optimization of carbon-based electrode materials for flow-electrode capacitive deionization

Recent advanced freestanding pseudocapacitive electrodes for efficient capacitive deionization

Tailoring the electrode material and structure of rocking-chair capacitive deionization for high-performance desalination