Abstract:The present paper would like to introduce a renovated electro-absorptive desalination method by using activated carbon coating electrodes.Since it is of great importance to remove ion from aqueous solutions both in natural environment and in industrial processes,for example,the desalination of seawater,there has been existing a promising method commonly known as capacitive deionization(CDI) for saline ion removal.It is just for satisfying such a need,we have developed a simplistic CDI cell reactor which we name flowing-through-capacitor(FTC) to study the mechanism of the electrosorptive desalination.In our work,we have prepared some activated carbon-coating electrodes in a simple and economic manner by coating a slurry mixture made of activated carbon powder(ACP) in a polymer solution including binder poly vinylidene fluoride(PVDF) and conductive graphite powder dissolved in di-methylacetamide(DMAc) on the current collector(a graphite plate).And,then,the mixture and the electric current collector were let to dry at 60 in a vacuum stove,in which the electrodes could be made to turn into activated carbon powder with a ratio of PVDF: graphite powder in 8:1:1.The electrodes here prepared can be characterized by using Scanning Electronic Microscopy(SEM) and Electrochemical workstation to analyze their surface morphology and electrochemical performance.The results of the SEM indicate that the activated carbon powder and PVDF binders tend to be effectively bonded.Measuring the cyclic voltammetry(CV) through a three-electrode-system in the CHI660 electrochemical workstation,we can obtain the specific capacitance from CV was 59.2 F/g.And,as a result,we can find that the influential factors of the electrodes chosen may have bias potential with their flowing rate and the distance between them.The best reaction conditions obtained by optimizing the affecting factors can be shown as follows: the bias potential was 1.6 V,the flowing rate was 10 L/min,the distance between the two electrode plates is 2 m,and in so doing,the highest desalination efficiency would be made to reach 47.9%.Investigating the reproducibility,cutting off the power supply when the electrosorption was let to keep the state of equilibrium,we can find that the electrodes could be regenerated in a short period.The results indicate that the electrosorption desalination technology we have renovated enjoys advantages of low cost,energy-saving with no secondary pollutant,hance available for practical application.

Optimization of activated carbon electrodes for desalination using capacitive deionization technique: strategies toward capacitive deionization cell refreshment

Enhancing Capacitive Deionization for Water Desalination: The Role of Activated Carbon in Contaminant Removal

Advanced Strategies for Improving the Energy Efficiency of Capacitive Deionization Technologies

Recent Progress and Challenges in Faradic Capacitive Desalination: from Mechanism to Performance.

Desalination Performance of a Unique Capacitive Deionization Cell Optimized with ANSYS Flow Simulation

Parameter Optimization Based on Capacitive Deionization for Highly Efficient Desalination of Domestic Wastewater Biotreated Effluent and the Fouled Electrode Regeneration

Renovated Electro-Absorptive Desalination by Using Activated Carbon Coating Electrodes

Electrocapacitive Deionization: Mechanisms, Electrodes, and Cell Designs

Water desalination using capacitive deionization with microporous carbon electrodes

Efficient Regeneration of Activated Carbon Electrode by Half-Wave Rectified Alternating Fields in Capacitive Deionization System

Desalination by Capacitive Deionization Process Using Nitric Acid-Modified Activated Carbon As the Electrodes

Resin-enhanced Rolling Activated Carbon Electrode for Efficient Capacitive Deionization

Enhanced capacitive deionization of an integrated membrane electrode by thin layer spray-coating of ion exchange polymers on activated carbon electrode

Optimization of the operational parameters for desalination with response surface methodology during a capacitive deionization process

Enhancing the Desalination Performance of Capacitive Deionization Using a Layered Double Hydroxide Coated Activated Carbon Electrode

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

Tactics for Boosting the Desalination Stability of Capacitive Deionization

Advances and Perspectives in Integrated Membrane Capacitive Deionization for Water Desalination

Studies on the Desalination of NaCl Solution with Activated Carbon Coating Electrodes by Electrosorption and Kinetic Analysis

Coupling ion-exchangers with inexpensive activated carbon fiber electrodes to enhance the performance of capacitive deionization cells for domestic wastewater desalination.

Effect of ion exchange resin membranes and activated carbon electrodes in water desalination using capacitive deionization technique with saline streams