Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Using Activated Carbon Fiber Separators to Enhance the Desalination Rate of Membrane Capacitive Deionization

Coupling ion-exchangers with inexpensive activated carbon fiber electrodes to enhance the performance of capacitive deionization cells for domestic wastewater desalination.

Enhanced Desalination Performance of Membrane Capacitive Deionization Cells by Packing the Flow Chamber with Granular Activated Carbon.

Enhanced Charge Efficiency and Electrode Separation Utilizing Magnetic Carbon in Flow Electrode Capacitive Deionization

Enhancing the Total Salt Adsorption Capacity and Monovalent Ion Selectivity in Capacitive Deionization Using a Dual-Layer Membrane Coating Electrode

Electrochemical capacitive desalination behavior of activated carbon fibers

Study on the Desalination and Regeneration Performance of PBA/AC Electrode Enhanced by MCDI

Electrosorptive Desalination by Carbon Nanotubes and Nanofibres Electrodes and Ion-Exchange Membranes

Relation Between the Charge Efficiency of Activated Carbon Fiber and Its Desalination Performance

Improving desalination by coupling membrane capacitive deionization with microbial desalination cell

Reducing Ohmic Resistances in Membrane Capacitive Deionization Using Micropatterned Ion-exchange Membranes, Ionomer Infiltrated Electrodes and Ionomer Coated Nylon Meshes

Structure and Process Optimization for Highly‐Efficient Membrane Capacitive Deionization

Deionization performance, desalination enhancement mechanism, desorption behavior and energy consumption analysis of biochar-based membrane capacitive deionization

Microbial desalination cell combined with capacitive deionization/membrane capacitive deionization to desalinate seawater

Effect of Hydrophilicity of Activated Carbon Electrodes on Desalination Performance in Membrane Capacitive Deionization

Small particle size activated carbon enhanced flow electrode capacitive deionization desalination performances by reducing the interfacial concentration difference

Capacitive deionization coupled with microbial fuel cells to desalinate low-concentration salt water.

Carbon felt (CF) acted as an "ionic capacitor" to enhance flow electrode capacitive deionization (FCDI) desalination performance

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

Mechanism of ball milled activated carbon in improving the desalination performance of flow- and fixed-electrode in capacitive deionization desalination

Optimization of the intermediate chamber improves desalination performance in flow electrode capacitive deionization (FCDI): A comparative study