Abstract:Flow electrode capacitive deionization (FCDI) is a highly promising desalination technique known for its exceptional electrosorption capacity, making it suitable for efficient salt separation in high salinity water. However, the unsatisfactory charge transfer process between the flow electrode and current collector severely curtails the salt separation and enrichment performance of the FCDI device. To address this issue, three-dimensional titanium mesh (3D-TM) was proposed as a novel current collector for FCDI device, which significantly amplifies the charge transfer area and exhibits excellent salt separation performance. The 3D-TM current collector promotes the electron transfer, charge percolation, and ion migration processes through the electroconvection generated by the turbulence effect on the flow electrode. In the specific case of the 20-mesh 3D-TM, which is composed of 12 stacking layers of titanium mesh, the remarkable average salt removal rate and charge efficiency were achieved 5.06 μmol cm −2 min −1 and 92.9 % under an appropriate applied voltage of 2.0 V, respectively. Dramatically, the desalination performance maintained above 76.4 % over 100 desalination cycles at 2.0 V, demonstrating the exceptional cyclic stability of the 3D-TM FCDI cell. In the seawater desalination, the 3D-TM FCDI cell exhibited an impressive salt removal efficiency of 97.5 % (from 34.2 g L − 1 to 0.84 g L − 1 ) for 1 L East China seawater at 2.0 V for 24 h. For lithium-ion enrichment, the FCDI continuous desalting system achieved an astonishing concentration of 17.3 g L − 1 for Li + ions enrichment from an initial concentration of 1.30 g L − 1 , obtaining the average salt treating rate of 23.6 g m − 2 h − 1 and charge efficiency of 80.0 %. Moreover, the lithium-sodium ions and lithium-magnesium ions enrichments were both conducted, yielding an enriched concentration of 10.4 g L − 1 and 7.30 g L − 1 for Li + ions, respectively. These findings highlight the enormous potential of FCDI technology in industrial engineering applications, further establishing it as a highly viable solution.

Flexible construction of three-dimensional continuous conductive structure by hollow carbon sphere and CNT for promoted ions transport in flow-electrode capacitive deionization

Three-dimensional titanium mesh-based flow electrode capacitive deionization for salt separation and enrichment in high salinity water

High speed capacitive deionization system with flow-through electrodes

A novel two-stage continuous capacitive deionization system with connected flow electrode and freestanding electrode

Capacitive deionization of NaCl solutions using carbon nanotube sponge electrodes

The optimized flow-electrode capacitive deionization (FCDI) performance by ZIF-8 derived nanoporous carbon polyhedron

Efficient capacitive deionization with 2D/3D heterostructured carbon electrode derived from chitosan and g-C3N4 nanosheets

Carbon nanotube bridged nickel hexacyanoferrate architecture for high-performance hybrid capacitive deionization

Up-shifting the desalination rate limit of capacitive deionization via integrating chloride-capturing Bi nanocluster with flow-through cell architecture

Enhanced Charge Efficiency and Electrode Separation Utilizing Magnetic Carbon in Flow Electrode Capacitive Deionization

Boosting Capacitive Deionization Performance of Commercial Carbon Fibers Cloth via Structural Regulation Based on Catalytic‐Etching Effect

Selection and optimization of carbon-based electrode materials for flow-electrode capacitive deionization

Enhanced desalination performances by using porous polyaniline-activated carbon composite flow-electrodes in capacitive deionization system

Hierarchical Co3O4/CNT decorated electrospun hollow nanofiber for efficient hybrid capacitive deionization

Designing NiFe-metal organic frameworks@NiFe-layered double hydroxide/carbon fiber self-supporting electrode for enhanced capacitive deionization

Importance of the conductivity and specific surface area of electrode particles to the desalination performance and energy efficiency of flow-electrode capacitive deionization

Carbonaceous C@FeS Flow Electrode for Electrochemcal Capacitive Deionization Application

Three-dimensional electrode design with conductive fibers and ordered macropores for enhanced capacitive deionization performance

3D-Printed river-type thick carbon electrodes for docking possible practical application-level capacitive deionization

Battery Electrode Materials with Omnivalent Cation Storage for Fast and Charge-Efficient Ion Removal of Asymmetric Capacitive Deionization

Carbon felt (CF) acted as an "ionic capacitor" to enhance flow electrode capacitive deionization (FCDI) desalination performance