Abstract:For both water softening and energy storage, to date, a variety of capacitive devices have been developed; however, their dual functionality has been rarely investigated. An enhanced selective sodium-ion removal along with charge-storage was achieved by combining sodium-ion capture and release through sorption and regeneration steps of a capacitive deionization (CDI) process, respectively. Leveraging their unique and reversible Na+-removal capability, sodium superionic conductors (NASICONs) hold immense promise for hybrid capacitive deionization (HCDI). Despite the great desalination ability of HCDI systems, the unbalanced ion-capture and the possibility of co-ion expulsion have led to a real bottleneck that can effectively be tackled by placing an ion exchange membrane (IEM) between the electrolyte and the electrode. Herein, the state-of-the-art Na+ selective technology has been engineered using well-matched carbon-coated NaTi2(PO4)(3) (NTP-C) and N-rich carbon nests (NCNs) as negative and positive electrodes, respectively. The fabricated HCDI cells benefit from a commendable salt adsorption capacity (SAC) of 96.8 mg g(-1), a salt adsorption rate (SAR) of 2.42 mg g(-1) min(-1), and a specific energy consumption (E-s) of 18.5 j mg(NaCl)(-1) in the sorption step. These devices also achieve a remarkable energy storage capacity (Q) of 46.52 C g(-1) at a low concentration of NaCl (500 ppm) in the regeneration step. The NTP-C//NCN HCDI systems achieved remarkable cycle stability with almost 92.3 and 91.3% retention of their salt adsorption and charge storage capacities, respectively, after 30 continuous cycles. The Na+ selective removal capability of the fabricated HCDI systems was evaluated by comparing their Na+ removal capacity in the absence and presence of Mg2+, Ca2+, and K+ ions (SNa+/X > 2.5) which resulted in a superior sodium removal efficiency (SRE%) of almost over 50% from both pure and contaminated mixtures. As a direct consequence of high charge storage capacity, the fabricated HCDI is well-suited for energy applications, so it marks the beginning of a pioneer horizon towards the commercialization of HCDI technologies.

Efficient dual-ions hybrid capacitive system for superior deionization with enhanced kinetics match

A Novel Dual-Ion Capacitive Deionization System Design with Ultrahigh Desalination Performance.

Anion-kinetics-selective Graphene Anode and Cation-Energy-selective MXene Cathode for High-Performance Capacitive Deionization

High-capacity and High-Stability Capacitive Desalination with Dual Redox-Active MnCo2S4/g-C3N4 Heterojunction Electrode

Enhanced Capacitive Deionization Performance with Self-Supporting Electrodes of Flexible Carbon Nanofiber/layered Double Hydroxide Composites

Efficient hybrid capacitive deionization with MnO2/g-C3N4 heterostructure: Enhancing Mn dz2 electron occupancy by interfacial electron bridge for fast charge transfer

Efficient and Durable Sodium, Chloride‐doped Iron Oxide‐Hydroxide Nanohybrid‐Promoted Capacitive Deionization of Saline Water via Synergetic Pseudocapacitive Process

Efficient Hybrid Capacitive Deionization Device with High Operating Voltage Based on Layered Sodium Manganese Oxide

Strong Interface Coupling Boosting Hierarchical Bismuth Embedded Carbon Hybrid for High-Performance Capacitive Deionization

Highly Efficient and Stable Desalination Via Novel Hybrid Capacitive Deionization with Redox-Active Polyimide Cathode

Novel hybrid capacitive deionization constructed by a redox-active covalent organic framework and its derived porous carbon for highly efficient desalination

Na2MnSiO4/C as hybrid capacitive deionization electrode material to enhance desalination performance

Towards an Advanced Electrochemical Horizon: Ion Selectivity and Energy Harnessing Through Hybrid Capacitive Deionization with Carbon-Coated NaTi2(PO4)3 and N-rich Carbon Nests

Integrating battery and capacitive materials for efficient sodium and chloride capture

Ultra-durable and highly-efficient hybrid capacitive deionization by MXene confined MoS2 heterostructure

Highly Efficient Capacitive Deionization Enabled by NiCo 4 MnO 8.5 Electrodes

Manganese dioxide nanoparticles/reduced graphene oxide nanocomposites for hybrid capacitive desalination

Boosted brackish water desalination and water softening by facilely designed MnO2/hierarchical porous carbon as capacitive deionization electrode

Enhancing the Total Salt Adsorption Capacity and Monovalent Ion Selectivity in Capacitive Deionization Using a Dual-Layer Membrane Coating Electrode

Battery Electrode Materials with Omnivalent Cation Storage for Fast and Charge-Efficient Ion Removal of Asymmetric Capacitive Deionization

Up-shifting the desalination rate limit of capacitive deionization via integrating chloride-capturing Bi nanocluster with flow-through cell architecture