Abstract:Capacitive deionization (CDI), a m ethod with notable advantages of relatively low energy consumption and environmental friendliness, has been widely used in desalination of saltwater. However, due to the weak electrical double-layer electrosorption of ions from water, CDI has suffered from low throughput capacity that may limit its commercial applications. Thus, it is of importance to develop a high-efficiency and engineering-feasible CDI process. Manganese and cobalt and their oxides, being faradic materials, have a relatively high pseudocapacitance, which can cause an increase of positive and negative charges on opposing electrodes. However, their low conductivity properties limit their electrochemical applications. Pseudocapacitive Mn3O4 nanoparticles encapsulated within a conducting carbon shell (Mn3O4@C) were prepared to enhance charge transfer and capacitance for CDI. Desalination performances of the Mn3O4@C (5-15 wt %) core-shell nanoparticles on activated carbon (AC) (Mn3O4@C/AC) serving as CDI electrodes have thus been investigated. The pseudocapacitive Mn3O4@C/AC electrodes with relatively low diffusion resistances have much greater capacitance (240-1300 F/g) than the pristine AC electrode (120 F/g). In situ synchrotron X-ray absorption near-edge structure spectra of the Mn3O4@C/AC electrodes during CDI (under 1.2 and -1.2 V for electrosorption and regeneration, respectively) demonstrate that reversible faradic redox reactions cause more negative charges on the negative electrode and more positive charges on the positive electrode. Consequently, the pseudocapacitive electrodes for CDI of saltwater ([NaCl] = 1000 ppm) show much better desalination performances with a high optimized salt removal (600 mg/g·day), electrosorption efficiency (48%), and electrosorption capacity (EC) (25 mg/g) than the AC electrodes (288 mg/g·day, 23%, and 12 mg/g, respectively). The Mn3O4@C/AC electrode has a maximum EC of 29 mg/g for CDI under +1.2 V. Also, the Mn3O4@C/AC electrodes have much higher pseudocapacitive electrosorption rate constants (0.0049-0.0087 h-1) than the AC electrode (0.0016 h-1). This work demonstrates the feasibility of high-efficiency CDI of saltwater for water recycling and reuse using the low-cost and easily fabricated pseudocapacitive Mn3O4@C/AC electrodes.

Highly Efficient Capacitive Deionization Enabled by NiCo 4 MnO 8.5 Electrodes

The enhanced synergistic capacitive desalination enabled by Ni@NiO@C hybrid anode

Enhanced capacitive deionization boosted by Co and N co-doping in carbon materials

Capacitive Deionization from Reconstruction of NiCoAl-mixed Metal Oxide Film Electrode Based on the “memory Effect”

Capacitive deionization with nitrogen-doped highly ordered mesoporous carbon electrodes

Pseudocapacitive Deionization of Saltwater by Mn3O4@C/Activated Carbon

Efficient dual-ions hybrid capacitive system for superior deionization with enhanced kinetics match

Capacitive Deionization with MoS2/g-C3N4 Electrodes

High-performance capacitive deionization electrodes through regulated electrodeposition of manganese oxide and nickel-manganese oxide/hydroxide onto activated carbon

Designing NiFe-metal organic frameworks@NiFe-layered double hydroxide/carbon fiber self-supporting electrode for enhanced capacitive deionization

Hierarchical Co3O4/CNT decorated electrospun hollow nanofiber for efficient hybrid capacitive deionization

Docked ions: Vertical-aligned tubular arrays for highly efficient capacitive deionization

Battery Electrode Materials with Omnivalent Cation Storage for Fast and Charge-Efficient Ion Removal of Asymmetric Capacitive Deionization

Polyaniline coated MOF-derived Mn2O3 nanorods for efficient hybrid capacitive deionization

Enhanced capacitive deionization of toxic metal ions using nanoporous walnut shell-derived carbon

Low-energy consumption, free-form capacitive deionisation through nanostructured networks

Boosted brackish water desalination and water softening by facilely designed MnO2/hierarchical porous carbon as capacitive deionization electrode

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Controlled synthesis of ZnO modified N-doped porous carbon nanofiber membrane for highly efficient removal of heavy metal ions by capacitive deionization

Cu-based MOF-derived architecture with Cu/Cu2O nanospheres anchored on porous carbon nanosheets for efficient capacitive deionization

Novel MoS2/NOMC Electrodes with Enhanced Capacitive Deionization Performances