Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

The regulation of biochar surface potential to achieve rapid capacitive deionization

Hierarchical Porous Carbons Derived from Porous Biomass for High-Performance Capacitive Deionization

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

A Comprehensive Review of Capacitive Deionization Technology with Biochar-Based Electrodes: Biochar-based Electrode Preparation, Deionization Mechanism and Applications.

Deionization performance, desalination enhancement mechanism, desorption behavior and energy consumption analysis of biochar-based membrane capacitive deionization

Electrochemical capacitive desalination behavior of activated carbon fibers

Biochar with inherited negative surface charges derived from Enteromorpha prolifera as a promising cathode material for capacitive deionization technology

Carbon electrode with cross-linked and charged chitosan binder for enhanced capacitive deionization performance

Integration of pore structure modulation and B, N co-doping for enhanced capacitance deionization of biomass-derived carbon

Highly mesoporous activated carbon electrode for capacitive deionization

Zeolitic Imidazolate Framework-8 Derived Two-Dimensional N-doped Amorphous Mesoporous Carbon Nanosheets for Efficient Capacitive Deionization

Expeditious and Effectual Capacitive Deionization Performance by Chitosan-Based Carbon with Hierarchical Porosity

Unleashing the power of capacitive deionization: Advancing ion removal with biomass-derived porous carbonaceous electrodes

Laser-induced nitrogen and phosphorus-doped spongy carbon with graphene wings derived from lignin for significantly enhanced capacitance deionization performance

Electrocapacitive desalination with nitrogen-doped hierarchically structured carbon prepared using a sustainable salt-template method

Enhanced Capacitive Deionization Properties of Activated Carbon Doped with Carbon Nanotube-Bridged Molybdenum Disulfide

Hierarchically porous biochar derived from aerobic granular sludge for high-performance membrane capacitive deionization

Large capacity and rapid rate of ion removal from synthetic municipal wastewater via CDI using chitosan-based nitrogen-doped porous carbon electrode

Enhanced capacitive deionization of an integrated membrane electrode by thin layer spray-coating of ion exchange polymers on activated carbon electrode

Capacitive deionization with nitrogen-doped highly ordered mesoporous carbon electrodes

Nitrogen-doped hierarchical porous carbon obtained from silk cocoon for capacitive deionization