Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

Air-coupled ultrasound transducer sound field characteristic measuring device

Probe’s Auto-alignment in Curved Components Ultrasonic Survey

Research on Ultrasonic Measurement of the Large Curved Surface Parts

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Automatic Sensitivity Compensation Technology on Ultrasonic Inspection of Curved Surface

A Device for Measuring Propagation Time of Ultrasonic Wave

Automatic Measurement of the Equivalent Static Capacitance of Ultrasonic Transducers for Dynamic Matching

Design and simulation of a 2-D array flexible ultrasound transducer system for tissue characterization – A pilot study

Multi-mode Ultrasonic Waves Focusing in a Variable Focus Technique for Simultaneous Sound-Velocity and Thickness Measurement

Investigation of a Multi-Element Focused Air-Coupled Transducer

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Simultaneous Measurement of Elastic Moduli, Attenuation, Density, and Thickness of a Layer by Ultrasonic Spectroscopy Using Point-Focus Transducer

Development and Prospect of Ultrasonic Bonding Transducer

Quasi-omnidirectional ultrasonic transceiver

Simultaneous Measurement of Local Longitudinal and Transverse Wave Velocities, Attenuation, Density, and Thickness of Films by Using Point-Focus Ultrasonic Spectroscopy

Design and Application of Ultrasound Focused Transducer for the Ultrasonic Feature Imaging Testing System

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

High-Frequency Photoacoustic Measurements in Air

Ultrasound field measurement using a binary lens

Broadband Air-Coupled Ultrasound Emitter and Receiver Enable Simultaneous Measurement of Thickness and Speed of Sound in Solids

Probing the Spatial Impulse Response of Ultrahigh-Frequency Ultrasonic Transducers with Photoacoustic Waves