Abstract:Advances in Solid State Circuits Technologies 194 the atomic level, and it consumes too much time, therefore, in most cases, it is not suitable for ESD simulation.Analytic implantation models are analyzed by series of distribution functions, including Gauss distribution function, Pearson distribution function, Pearson-IV distribution function (P4), Pearson-IV distribution with linear exponential tail function ( P 4 S ) , P e a r s o n -I V d i s t r i b u t i o n w i t h g e n e ral exponential tail function (P4K), Gauss distribution with general exponential tail function (GK), Jointed half-Gauss distribution function (JHG), Jointed half-Gauss distribution with general exponential tail function (JHGK).The eight distribution functions are called single primary distribution functions.The complicated expressions of the functions will not be discussed here, and all of them can be found in the DIOS USER'S MANUAL.The single primary distribution functions describe the relationship between impurity distribution and seven key parameters, which are determined by implantation process step.The seven key parameters are RP (Rp), STDV ( p), STDVSec ( p2), GAMma ( ), BETA ( ), LEXP (lexp), LEXPOW ( ).The range of parameters that must be specified for each of the single primary distribution functions are shown in Table1.In Table1, x means the parameter must be a real number, x0 means the parameter must be nonnegative, > 0 means the parameter must be positive, and ∅ means the parameter is not allowed for the particular function.Once the implanted element, energy, dose, tilt and rotation of an implantation process step are defined by users, the relevant parameter set will be looked up in implant tables.With proper parameter set, the impurity distribution will be calculated subsequently.If users have data fitted to experiments, the parameter set can be defined in implantation command. How to referenceIn order to correctly reference this scholarly work, feel

ESD: transient fields, arc simulation and rise time limit

Transient Electrothermal Analysis of Interconnects in the Presence of a ESD pulse

Transient Electrothermal Analysis of Multilevel Interconnects in the Presence of ESD Pulses Using the Nonlinear Time-Domain Finite-Element Method

Electro-Thermo-Mechanical Investigation On Multi-Level Interconnects In The Presence Of An Esd Pulse

Advanced Simulation for ESD Protection Elements

Implementation Of Temperature Dependent Contact Resistance Model For The Analysis Of Deep Submicron Devices Under Esd

Transient Electro-Thermo-mechanical Responses of Wire Bonding Interconnects Illuminated by an Electromagnetic Pulse

Investigation of Turn-on Speeds of Electrostatic Discharge Protection Devices Using Transmission-Line Pulsing Technique

Simulation And Measurement Of The Transient Field Of Indirect Electrostatic Discharge

Transient Near-Field Effect of Electrostatic Discharge

A Method To Model Mosfet'S Second Breakdown Action For Circuit-Level Esd Simulation

Modeling the development of low current arcs and arc resistance simulation

A Novel and Powerful TCAD Methodology to Evaluate Performance of ESD Protection Devices

Analyse of Protection Devices' Speed Performance against ESD under CDM Using TCAD

Estimation time delay from field emission to secondary electron emission avalanche in vacuum surface flashover

Trigger voltage walk-in effect of ESD protection device in HVCMOS

Breakdown Voltage of Ultrathin Dielectric Film Subject to Electrostatic Discharge Stress

Electrostatic discharge current analyzed by transmission line theory

Internal Electrostatic Discharge Modeling: Validation and Fitting Using Tests on Insulated Wires

A Scalable Model for Snapback Characteristics of Circuit-Level ESD Simulation

A Novel SPICE Circuit Model of Electrostatic Discharge (ESD) Generator.