Abstract:A technological route for recycling silicon slurry cutting waste (SSCW) as silicon source to prepare high purity silicon carbide as well as reducing the industry cost and avoiding the environmental pollution aroused by the waste was explored. The effect of Fe2O3, NaCl addition and smelting temperature on production of high quality SiC were studied. The existence of Fe element acts like a catalyst and contributes to the synthesis of SiC at relatively low temperatures (1550 °C). The excess of Fe element in the SSCW, however, would inhibit further improvement of the purity of the SiC product since Fe element would remain in the final product as Si-Fe alloy. Slight addition of salt was also verified to be positive for the improvement of SiC yield and purity. SiC product with a purity of more than 93 wt.% was obtained after acid leaching for the removal of Fe impurity and under the optimized conditions as NaCl addition of 7 wt.% and smelting temperature of 1850 °C. The thermodynamic analysis shows that a series of intermediate gas products (CO, SiO, SiO2) have been generated and taken an important role in the synthesis of SiC and excess carbon source is necessary for promoting the utilization of the SSCW since it can efficiently contribute to the formation of SiC and the intermediate products namely SiO and CO. The nucleation mechanism analysis indicates that both the original size and morphology of the carbon source and SiC particles have great influence on the forming particle size and morphology of the generated SiC since both can act as a nucleation center for a certain amount of SiC which is verified by the SEM analysis.

A Study of the Effect of Quartz-to-Cristobalite Transformation on SiC Generation in Metallurgical-Grade Silicon Production

In Situ Synthesis and Interfacial Bonding Mechanism of SiC in MgO–SiC–C Refractories

Carbothermal Reduction Behavior of Micro-silica

Effects of Graphitization Degree of Crucible on Sic Single Crystal Growth Process

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Numerical investigation of carbon and silicon carbide contamination during the melting process of the Czochralski silicon crystal growth

Influence of Inner Crucible Radius Variation on the Thermal Field and Oxygen Transport in the Melt During the Growth of Silicon by Continuous Czochralski Method

The Effect of SiC on the Phase Composition and Structure of Mixed Slag

Recrystallization of amorphized Si during micro-grinding of RB-SiC/Si composites

Recycle of silicon slurry cutting waste to prepare high purity SiC by salt-assisted carbothermic reduction

Carbothermal Reduction of Quartz with Carbon from Natural Gas

Comparative study on the microstructure evolution and crystallization behavior of precursor-derived and mechanical alloying derived SiBCN

Effect of Removal of Silicon on Preparation of Porous SiC Ceramics Following Reaction Bonding and Recrystallization

SiC Generation Mechanism in Photovoltaic Crystal Pulling Waste Graphite Infusion Cylinder

Removal of Metal Impurities in Metallurgical Grade Silicon by Cold Crucible Continuous Melting and Directional Solidification

Interfacial reaction mechanism and high temperature stability of heat-resistant steel and SiC under a vacuum environment

Theoretical and experimental study of the mechanism for preparation of SiC nanowires by carbothermal reduction

Effect of Silicon Addition on Mechanical Properties of Mullite-Sic Composite Refractories

Formation Mechanism and Effect on the Mechanical Properties of TiSi Phase for Ti-5Al-5Mo-5Cr-3Nb-2Zr Alloyed by Silicon

Influence on TiC microstructure from different synthesis processes in the Cu–Ti–SiC system

Global Simulation of Coupled Oxygen and Carbon Transport in an Industrial Directional Solidification Furnace for Crystalline Silicon Ingots: Effect of Crucible Cover Coating