Abstract:The wear and adhesion of bearing surface under boundary lubrication is the key to the development and application of bearing technology. For improving the antifriction and antiadhesion properties of the bearing materials, the sulfur rich nano self-lubricating thin layers were prepared on the bearing surface by low-temperature sulfide permeation technology. The morphology and composition of the sulfurized layer were characterized microscopically, and the tribological properties of the sulfurized layer were analyzed to reveal the anti-friction and anti-adhesion mechanism of the sulfurized layer on the surface of bearing steel. The results show that the sulfurized layer is flatter and does not contain nanostructures when the formulation does not contain thiourea, and the content of element S is lower. After the addition of thiourea, the surface of the sulfurized layer is formed by the accumulation of nanosheet-like structures. The nano sulfurized layer has higher S-element content and better tribological properties. When thiourea and tartaric acid are added to the sulfurizing formula at the same time, the nano-sheet structure of the sulfurized layer is more dense and uniform. Moreover, the number of microcracks in the sulfurized layer is small, and the tribological properties are further improved. At the same time, the sulfide in the self-lubricating thin layer and the lubricating oil stored in the gaps can make the bearing surface have a typical "liquid-solid synergistic lubrication effect". That is conducive to the formation of the self-lubricating film and the transfer to the dual parts. All these factors improve the antifriction and antiadhesion properties of the bearing materials effectively.

In-situ synthesis of size-tunable silver sulfide nanoparticles to improve tribological properties of the polytetrafluoroethylene-based nanocomposite lubricating coatings

Exploring the Effect of Nanoparticle Size on the Tribological Properties of Sio2 / Polyalkylene Glycol Nanofluid under Different Lubrication Conditions

In-situ synthesis of Cu2S nanoparticles to consolidate the tribological performance of PAI-PTFE bonded solid lubricating coatings

Bio-based silsesquioxanes nano hybrids for enhancing the tribological performance of silicone oil: A DFT and experimental study

Synthesis and interfacial interaction of Ag2S quantum dots for enhancing the tribological behaviors of PTFE-based lubricating coatings

Strengthening mechanism of in-situ synthesized Cu2S nanoparticles on tribological performance of polyamide-imide bonded solid lubricating coatings

Influence of Ag Contents on Structure and Tribological Properties of TiSiN-Ag Nanocomposite Coatings on Ti–6Al–4V

Tribological behavior and microstructural evolution of lubricating film of silver matrix self-lubricating nanocomposite

Silver/Graphene Nanocomposite as an Additive for Aqueous Lubrication

Tribological performance analysis of nano-FeS films deposited on the surface of bearing steel

Effect of the Particle Size on Tribological Properties of Nanometer Fe3O4 as Lubricating Oil Additives

Preparation and tribological behaviors of polyamide-imide/polytetrafluoroethylene lubricating coatings reinforced by in-situ synthesized CeO2 nanoparticles

Effect of lubricant additives of Cu, Fe and bimetallic CuFe nanoparticles on tribological properties

A Novel Method to Prepare Self‐lubricity of Si3N4/Ag Composite: Microstructure, Mechanical and Tribological Properties

Sulfur-Containing Carbon Nanospheres as Lubricant Additives for Antiwear and Friction Reduction

The Effect of Solid-Liquid Composite Lubrication on the Tribological Properties of Bearing Steel

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Improving tribological performance of metallic coatings: A synergy of gradient structure and solid lubricant modification

Mono-dispersed Ag/Graphene nanocomposite as lubricant additive to reduce friction and wear

In situ preparation of Cu-Mo-S nanoparticle additive with multi-functional tribological properties

Synergistic low friction effect and mechanism of inorganic fullerene-like tungsten disulfide and talcum at the interface of steel tribo-pairs under severe conditions