Abstract:The preparation and tribological properties of PAI/PI‐EPN polymer coatings. To improve the tribological properties of polar crane copper alloy bearings to withstand wear under dry sliding wear and grease lubrication at low temperatures, three kinds of coating materials modified by incorporating WS2 and SiC into polyamide‐imide/polyimide‐phenolic epoxy resin were designed. These composite coatings were sprayed on the surfaces of CuPb22.5Sn2.5 copper alloys by liquid spraying technique. Firstly, the tribological experiments were performed with three different coatings. Then, nanoindentation testing and wear morphology analysis were conducted. The results show that the hardness of the composite coatings decreases with the increase of WS2. As the content of WS2 increases, the coefficients of friction (CoFs) of coatings decreases under dry sliding wear. The S2 coating filled with 7.5 wt% WS2 exhibits the lowest wear rate and the best wear resistance under low temperature and dry sliding wear. The coatings form a lubricating film on the worn surface under dry sliding wear at −70°C, improving the wear resistance of the coatings. The primary wear mechanisms are adhesive wear and fatigue wear. The wear rates of the coatings increase with the increasing content of WS2 under low‐temperature grease lubrication. The S1 coating filled with 5.0 wt% WS2 exhibits the lowest wear. The S1 coating demonstrates a CoF of 0.07 and a wear rate of 6.5 × 10−6 mm3N−1 m−1 at 0°C, showing excellent friction‐reducing and wear‐resistant properties. The primary wear mechanism is adhesive wear. The wear mechanisms of polymer coatings are closely related to temperature. The dominant wear mechanisms transfer from abrasive wear to adhesive wear and fatigue wear under dry sliding wear and decreasing temperature. The wear mechanisms transfer from predominantly adhesive and abrasive wear to adhesive wear, fatigue wear, and abrasive wear under grease lubrication. The hardness of the coatings and the behavior of the polymer at various low temperatures are the primary factors that affect the differing wear mechanisms.

In-situ synthesis of Cu2S nanoparticles to consolidate the tribological performance of PAI-PTFE bonded solid lubricating coatings

Strengthening mechanism of in-situ synthesized Cu2S nanoparticles on tribological performance of polyamide-imide bonded solid lubricating coatings

In-situ synthesis of size-tunable silver sulfide nanoparticles to improve tribological properties of the polytetrafluoroethylene-based nanocomposite lubricating coatings

Preparation and tribological behaviors of polyamide-imide/polytetrafluoroethylene lubricating coatings reinforced by in-situ synthesized CeO2 nanoparticles

Synthesis and interfacial interaction of Ag2S quantum dots for enhancing the tribological behaviors of PTFE-based lubricating coatings

Tribological Study of Polytetrafluoroethylene Lubricant Additives Filled with Cu Microparticles or Sio2 Nanoparticles

Preparation and Evaluation of Tribological Properties of Cu Nanoparticles Surface Modified by Tetradecyl Hydroxamic Acid

Synthesis and Tribological Behavior of Surface Coated Cu Nanoparticles in Liquid Paraffin

Mass‐produced Cu Nanoparticles As Lubricant Additives for Reducing Friction and Wear

In situ preparation of Cu-Mo-S nanoparticle additive with multi-functional tribological properties

CuS Nanoparticles Capped with MPEGOCS2K for Applications As Lubricants and Antiwear Additives

The Tribological Properties of Oil-Soluble Nano-Copper and Nano-Silica Particles as Additives of Lubricating Oils

Nonaqueous In-Situ Synthesis and Tribological Properties of CuS Nanoparticles with Ultra-Dispersity-Stability

Mass-Produced Cu Nanoparticles As Lubricant Additives to Enhance the Tribological Properties of DLC Coatings

The investigation of tribological properties of PAI/PI‐EPN polymer coating filled with WS2 and SiC at low temperatures

Preparation and Tribological Properties of Surface-Capped Copper Nanoparticle as a Water-Based Lubricant Additive

Designing a PAI/PTFE coating with enhanced high-temperature tribological properties by S8-POSS: Solid-liquid dual lubrication

A Simple Preparation of HDA-CuS Nanoparticles and Their Tribological Properties As a Water-Based Lubrication Additive

Tribological Properties of Polyimide Coatings Filled with PTFE and Surface‐modified Nano‐si3n4

CU Nanoparticles Effect on the Tribological Properties of Hydrosilicate Powders As Lubricant Additive for Steel–steel Contacts

Effect of Cu Nanoparticles on the Tribological Performance of Attapulgite Base Grease