Abstract:Coarse-grained (CG), fine-grained (FG), and ultrafine-grained (UFG) Al-2.5 wt% Cu (Al-Cu) alloys were respectively prepared, with and without 0.3 wt% Sc addition, for comparison. The influences of minor Sc addition on the microstructural evolution, tensile mechanical properties and pitting corrosion resistance were system. atically studied at different grain scales. A significant Sc microalloying effect on the precipitation was observed that the minor Sc addition promoted the dispersion of finer theta'-Al2Cu precipitates in the CG alloy and favored the intragranular theta'-Al2Cu precipitation in the FG and UFG alloys, with the smaller grain size leading to a stronger Sc microalloying effect. The Sc addition induced convincing increases in the yield strength at all the three grain scales, and improved (in the CG and UFG Al-Cu alloys) or retained (in the FG Al-Cu alloy) the pitting corrosion resistance at the same time. This indicates that the inverse strength-pitting corrosion correlation as usually observed can be broken by minor Sc addition. The strengthening mechanisms were discussed and the grain size dependent pitting corrosion resistance mediated by the Sc addition was rationalized in terms of a competition between the positive influence derived from the interfacial Sc segregation and the negative influence come from the deformation-induced dislocations. The present findings provide a possible approach to break the inverse strength-pitting resistance correlation in heat-treatable Al alloys by modifying the precipitate/matrix interfaces through the suitable microalloying atom segregation.

Corrosion behavior of Al-6.8Zn-2.2Mg-Sc-Zr alloy with high resistance to intergranular corrosion

The Effect of Cu and Sc on the Localized Corrosion Resistance of Al-Zn-Mg-X Alloys

Effect of Sc and Zr Additions on Microstructures and Corrosion Behavior of Al-Cu-Mg-Sc-Zr Alloys

Tailoring the corrosion behavior and mechanism of Mg-Gd-Zn alloys via Sc microalloying

Effect of grain structures and precipitation characteristics on the corrosion behaviour of Sc-containing Al-Cu-Li alloy

Influence of Sc and Zr additions on microstructure and properties evolution of Al–Zn–Mg alloy

Densification, Microstructure and Anisotropic Corrosion Behavior of Al-Mg-Mn-Sc-Er-Zr Alloy Processed by Selective Laser Melting

Mechanical properties, corrosion behavior and microstructure evolution of zinc and scandium co-strengthened 5xxx alloy

Grain Size-Dependent Sc Microalloying Effect on the Yield Strength-Pitting Corrosion Correlation in Al-Cu Alloys

Sc/Zr microalloying on strength-corrosion performance synergy of wire-arc directed energy deposited Al-Mg

Enhancing the intergranular corrosion resistance and mechanical properties of Al–Mg–xSi–Cu–Zn alloys by synergistic intergranular and intragranular precipitation behaviors

Influence of Sc Addition on Precipitation Behavior and Properties of Al-Cu-Mg Alloy

Influence of Minor Zn Addition on Precipitation Behavior and Intergranular Corrosion Properties of Al-Mg-Si Alloy

Effect of Microstructure Evolution on the Corrosion Behavior of Extrusion-Shearing Mg-3zn-Xca-0.6zr Alloys

Effect of aging on the mechanical properties and corrosion susceptibility of an Al-Cu-Li-Zr alloy containing Sc

Corrosion behavior characterization of as extruded Mg-8Li-3Al alloy with minor alloying elements (Gd, Sn and Cu) by scanning Kelvin probe force microscopy

Correlations among stress corrosion cracking, grain-boundary microchemistry, and Zn content in high Zn-containing Al–Zn–Mg–Cu alloys

Effect of Trace Zn on the Mechanical Properties and Corrosion Behavior of Al-Mg-Si Alloys with High Cu

Microstructure, Mechanical Properties and Corrosion Behaviors of Al–Li–Cu–Mg–Ag–Zn Alloys

Microstructures and Properties of Al–Zn–Mg–Mn Alloy with Trace Amounts of Sc and Zr

Intergranular Corrosion of an Al-Cu-Li Alloy: the Influence from Grain Structure