Abstract:Sc microalloying and isothermal multidirectional compression (IMC) are important methods to refine grains and improve the mechanical properties of Al–Zn–Mg–Cu–Zr alloys. Herein, EBSD , SAXS and TEM have been carried out to investigate the effect of IMC and minor Sc on the microstructure, especially for grain boundary wetting, and mechanical properties of aged Al–Zn–Mg–Cu–Zr alloys by melting and hot compression process parameter optimization. The results show that the strength and plasticity can be obviously improved simultaneously by minor Sc addition and IMC. Especially, stripy GBs (one kind of typical GB complexion) have been widely observed for alloy samples after microalloying Sc and IMC, which indicates the occurrence of GB wetting for Al–Zn–Mg–Cu–Zr alloy. And the GB wetting degree gradually increases for alloys with only microalloying Sc, only IMC and (microalloying Sc + IMC). Combined with GB wetting, the formation of Al 3 (Sc, Zr) due to Sc addition could inhibit the motion of dislocation and grain boundary, which promotes formation and inhibit growth of recrystallized grains, leading to further grain refinement. Besides, GB wetting degree would affect the precipitate distribution, especially for grain boundary precipitates. Also, GB wetting probably promote grain bridging, which is beneficial to improve the yield strength and ductility of Al–Zn–Mg–Cu–Zr alloys. The concurrent effect of grain refinement, the precipitate including finer Al 3 (Sc, Zr) particles, dislocation strengthening and grain bridging contribute to the simultaneous improvement of the strength and ductility of Al–Zn–Mg–Cu–Zr alloys under IMC and Sc. This study provides a new understanding on microalloying Sc combined with IMC on the microstructure and properties of Al–Zn–Mg–Cu–Zr alloys.

Influence of Sc and Zr additions on microstructure and properties evolution of Al–Zn–Mg alloy

Effects of Cr and Zr additions on the microstructure and properties of Cu-6wt.% Ag alloys

Effects of Zr and Mg alloying on microstructure and properties of Cu-Cr-Si alloys

Influence of minor Sc additions on grain refinement and microstructure characteristics of a high Zn-containing Al-Zn-Mg-Cu-Zr alloy

Sc/Zr microalloying on strength-corrosion performance synergy of wire-arc directed energy deposited Al-Mg

EFFECT OF Sc ON MICROSTRUCTURE AND PROPERTIES OF Al-Li-Cu-Mg-Zr ALLOY

Effect of scandium on microstructure and mechanical properties of high zinc concentration aluminum alloys

Nanostructure Characteristics of Al3Sc1-xZrx Nanoparticles and Their Effects on Mechanical Property and SCC Behavior of Al-Zn-Mg Alloys

Effects of Sc and Zr microalloying on the microstructure and mechanical properties of high Cu content 7xxx Al alloy

Influence of Zr content on microstructure and mechanical properties of As-cast Al-Zn-Mg-Cu alloy

Mechanical properties, corrosion behavior and microstructure evolution of zinc and scandium co-strengthened 5xxx alloy

Effect of Zr addition on the microstructure evolution and mechanical properties of extruded Al-Cu-Li-Mn alloys

Effect of Minor Sc Addition on the Microstructure Evolution of Al–Cu–Li–Mg Alloy During Homogenization with Different Cooling Modes

Effect of isothermal multidirectional compression on microstructure and mechanical properties of Al–Zn–Mg–Cu–Zr alloy with minor Sc addition

The influence of Zn addition on the microstructure and mechanical and corrosion properties of warm rolled Al mg alloys containing Er and Zr

Effect of the Zn/Mg Ratio on Microstructures, Mechanical Properties and Corrosion Performances of Al-Zn-Mg Alloys

Investigating the role of Cu, Zr and V on the evolution of microstructure and properties of Al-Si-Mg cast alloys

Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures

Microstructures evolution and mechanical properties disparity in 2070 Al-Li alloy with minor Sc addition

Influence of Al Addition on the Microstructure and Mechanical Properties of Mg-Zn-Sn-Mn-Ca Alloys

Microstructure, Mechanical Properties and Corrosion Behaviors of Al–Li–Cu–Mg–Ag–Zn Alloys